Absolute Completion Technologies Ltd.

Major Late Model CNC Machining Event

 

Date

Thursday, December 3, 2020

Start Time

10:00 AM MST

Inspection

BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.

Removal

All assets must be removed no later than Thursday, December 17 by appointment only.

Industry

Machining
 


 

FEATURING: (2) MAZAK (2012) SVC 2000L/200-II high speed CNC travelling column vertical machining centers w/ 212”x20” tables, rotary axis, 15,000 RPM, etc.; (2) MAZAK (2011) SVC 2000L/200-II high speed CNC travelling column vertical machining centers w/ 212”x20” tables, rotary axis, 15,000 RPM, etc.; MAZAK (2010) SVC 2000L/200-II high speed CNC travelling column vertical machining center w/ 212”x20” table, rotary axis, 15,000 RPM, etc.; MAZAK (2008) SVC 2000L/200-II high speed CNC travelling column vertical machining center w/ 212”x20” table, rotary axis, 15,000 RPM, etc. (PROFESSIONALLY PACKED, CRATED & READY TO BE SHIPPED); HYUNDAI-KIA(2011) SKT 28LM CNC live milling & turning center w/ LNS bar feed; CATELECTS A.C.T. FACSRITE hydraulic disc insertion machine; (2) MILLER (NEW AS 2014) PROHEAT 35 digital liquid cooled induction system (PAID 45K NEW EACH); (5) MILLER INTELLIFIRE 250 digital induction heating power sources w/ MILLER IH/TS digital induction heating temperature stations; (5) LINCOLN (NEW AS 2018) ASPECT 375 AC/DC digital TIG welders; (5) MILLER XMT 350 digital MIG welders; MILLER boom welding system with MILLER 70 SERIES twin reel wire feeder; W.F. WELDING & CRANE (LATE MODEL) double girder 86’ span bridge crane w/ (2) 5 ton hoists, radio controls etc.; W.F. WELDING & CRANE (LATE MODEL) 2 ton x 45’ span single girder bridge crane; COMBI-LIFT (2013 & LIKE NEW) C17300 15,265 lb capacity LPG side loading forklift; SELLICK SD-80 8000 lb capacity diesel outdoor forklift; PETTIBONE 10032 10,000 lb capacity rough terrain diesel telehandler; CATERPILLAR 36V electric reach truck; TOYOTA 8000 lb capacity diesel forklift; DAEWOO 4450 lb capacity LPG forklift; (2) ATLAS COPCO (2014 & 2011) GA55 FF 75 HP rotary screw air compressors; LJ WELDING adjustable welding positioner; MODERN TOOL horizontal band saw; TOS FAV4 vertical mill w/ DRO; JFMT JIMK530 21” x 60” gap bed engine lathe; (5) 40’ sea containers; 60’ x 30’ x 20’H outdoor collapsible Quonset hut; CUSTOM BUILT multi-spindle pipe drilling machine capable of drilling 40 holes at a time; DAREX XPS-16 CNC tool sharpener; LARGE OFFERING OF precision tooling, pipe storage racks, LARGE FINISHED PIPE INVENTORY, general fabricating & machining support equipment & MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

Rusty’s Equipment & General Hauling
Doug Manuel
(780) 456-5611
[email protected]

CNC VERTICAL MACHINING CENTERS

  • MAZAK (2012) SUPER VELOCITY CENTER 2000L/200-II high speed CNC travelling column vertical machining center with MAZATROL MATRIX CNC control, 212”x20” table, 7480 lb. max. table load, travels: X – 200”, Y- 20”, Z – 20”, 27” max. distance spindle nose to table top, spindle speeds to 15,000 RPM, 20 HP, BT40 spindle, 30 station ATC, coolant, chip conveyor, (6) material saddles, (2) round stock rollers, 24” 3 jaw chuck (may be sold separately), RENISHAW OMM-2 optical tool check system with RENISHAW OMP40-2 touch probe, s/n: 234583
  • MAZAK (2012) SUPER VELOCITY CENTER 2000L/200-II high speed CNC travelling column vertical machining center with MAZATROL MATRIX CNC control, 212”x20” table, 7480 lb. max. table load, travels: X – 200”, Y- 20”, Z – 20”, 27” max. distance spindle nose to table top, spindle speeds to 15,000 RPM, 20 HP, BT40 spindle, 30 station ATC, coolant, chip conveyor, (6) material saddles, (2) round stock rollers, 24” 3 jaw chuck (may be sold separately), RENISHAW OMM-2 optical tool check system with RENISHAW OMP40-2 touch probe, s/n: 234582
  • MAZAK (2011) SUPER VELOCITY CENTER 2000L/200-II high speed CNC travelling column vertical machining center with MAZATROL MATRIX CNC control, 212”x20” table, 7480 lb. max. table load, travels: X – 200”, Y- 20”, Z – 20”, 27” max. distance spindle nose to table top, spindle speeds to 15,000 RPM, 20 HP, BT40 spindle, 30 station ATC, coolant, chip conveyor, (6) material saddles, (2) round stock rollers, 24” 3 jaw chuck (may be sold separately), RENISHAW OMM-2 optical tool check system with RENISHAW OMP40-2 touch probe, s/n: 227370
  • MAZAK (2011) SUPER VELOCITY CENTER 2000L/200-II high speed CNC travelling column vertical machining center with MAZATROL MATRIX CNC control, 212”x20” table, 7480 lb. max. table load, travels: X – 200”, Y- 20”, Z – 20”, 27” max. distance spindle nose to table top, spindle speeds to 15,000 RPM, 20 HP, BT40 spindle, 30 station ATC, coolant, chip conveyor, (6) material saddles, (2) round stock rollers, 24” 3 jaw chuck (may be sold separately), RENISHAW OMM-2 optical tool check system with RENISHAW OMP40-2 touch probe, s/n: 227317
  • MAZAK (2010) SUPER VELOCITY CENTER 2000L/200-II high speed CNC travelling column vertical machining center with MAZATROL MATRIX CNC control, 212”x20” table, 7480 lb. max. table load, travels: X – 200”, Y- 20”, Z – 20”, 27” max. distance spindle nose to table top, spindle speeds to 15,000 RPM, 20 HP, BT40 spindle, 30 station ATC, coolant, chip conveyor, (6) material saddles, (2) round stock rollers, 24” 3 jaw chuck (may be sold separately), RENISHAW OMM-2 optical tool check system with RENISHAW OMP40-2 touch probe, s/n: 220165
  • MAZAK (2008) SUPER VELOCITY CENTER 2000L/200-II high speed CNC travelling column vertical machining center with MAZATROL MATRIX CNC control, 212”x20” table, 7480 lb. max. table load, travels: X – 200”, Y- 20”, Z – 20”, 27” max. distance spindle nose to table top, spindle speeds to 15,000 RPM, 20 HP, BT40 spindle, 30 station ATC, coolant, chip conveyor, (6) material saddles, (2) round stock rollers, 24” 3 jaw chuck, s/n: 208850

CNC LIVE MILLING & TURNING CENTER

  • HYUNDAI-KIA (2011) SKT 28LM CNC live milling & turning center with FANUC Oi-TD CNC control, collet chuck, 25” swing over bed, approx. 11.5” turning diameter, approx. 42” machining length, 3” spindle bore, live tooling, 12 station turret, speeds to 3500 RPM, 30 HP spindle motor, LNS hydraulic steady rest, tailstock, tool setter swing arm, coolant, chip conveyor, s/n: G3155-0173

AUTOMATIC BAR FEEDER

  • LNS (2012) QLS80 automatic bar feeder with 3/8” – 3” diameter round bar capacity, 14”-62” bar length capacity, s/n: 27062201

HYDRAULIC DISC INSERTION MACHINE

  • CATELECTS A.C.T. FACSRITE hydraulic disc insertion machine with NEMATRON PLC control, 20” 3 jaw chuck, (2) hydraulic insertion heads, approx. 48’ travel along bed, s/n: CEI0511

MULTI-SPINDLE PIPE DRILL

  • ALMAC MACHINE WORKS DR-56-4 56 bit pipe drill with PLC touch screen control, dual drill heads (1) fixed & (1) adjustable with (28) drill bits per head, adjustable speeds from 400 to 900 RPM, hydraulic clamping, full 360 degree pipe rotation, coolant, s/n: n/a

WELDING EQUIPMENT

  • (5) MILLER INTELLIFIRE 250 induction heating welding power sources with MILLER IH/TS digital induction heating temperature station, MILLER cooling system, s/n: LE181117, LF096851, LE139736, LF0968552, LE139737
  • (2) MILLER PROHEAT 35 digital induction heating welding power sources, s/n: ME100023G, MA370116G
  • (5) LINCOLN ELECTRIC ASPECT 375 digital TIG welders with LINCOLN ELECTRIC COOL ARC 47 water cooling system, cables & gun, s/n: U1180605485, U1160109448, U1151208329, U1151207716, U1160102038
  • (2) MILLER XMT 350 MIG welder with MILLER 70 SERIES wire feeder, cables & gun, s/n: LG040205A, MB230169A
  • MILLER XMT 350 MIG welder with MILLER 22A wire feeder, cables & gun, s/n: n/a
  • MILLER MILLERMATIC (2010) 252 portable MIG welder with cables & gun, s/n: MA390339M
  • MILLER MILLERMATIC 250 portable MIG welder with cables & gun, s/n: n/a
  • LINCOLN ELECTRIC DIALARC 250 arc welder with cables & gun, s/n: n/a
  • MILLER free standing welding boom with MILLER 70 SERIES twin reel wire feeder with cables & gun, 10’ reach, s/n: n/a
  • LJ WELDING & MACHINE (2011) MODEL 12P adjustable welding positioner with 12” 3 jaw chuck, 90 deg. max. angle, scissor lift table, s/n: n/a

OVERHEAD BRIDGE CRANES

  • W.F. WELDING & CRANE 10 ton double girder top-running overhead bridge crane with 86’ span, 20’ under hook, (2) 5 ton electric hoists, wireless pendant, s/n: C5632-01
  • W.F. WELDING & CRANE 2 ton single girder top-running overhead bridge crane with 45’ span, 20’ under hook, 2 ton electric hoist, wireless pendant, s/n: C5723-10

ROLLING STOCK

  • COMBI-LIFT (2013) C17300 LPG multi-directional side load forklift with 15,265 lb. capacity, approx. 178” max. lift height, 58.5” platform length, cushion tires, 1161 hrs (recorded at time of listing), s/n: 21087
  • PETTIBONE MODEL 10032 diesel rough terrain telehandler boom tuck with 10,000 lb. capacity, 32.5’ max. lift height, 19’ max. forward reach, 60 deg. max. boom angle, FWD, pneumatic tires, 11,236 hrs (recorded at time of listing), s/n: 4837
  • SELLICK SD-80 outdoor diesel forklift with 8000 lb. capacity, 169” max. vertical lift, 2 stage mast, side shift, pneumatic tires, fully enclosed cab, heater, scale, s/n: 4518010832
  • TOYOTA 02-5FD35 diesel forklift with 8000 lb. capacity, 145” max. vertical lift, 2 stage mast, cushion tires, s/n: 20290
  • DAEWOO G25P-3 LPG forklift with 4450 lb. capacity, 186” max. vertical lift, 3 stage mast, side shift, cushion tires, s/n: D2-01620
  • CATERPILLAR (2008) NR4000P 36V electric reach truck with 4000 lb. capacity, 318” max. vertical lift, 36V battery charger (may be sold separately), GNR3749712
  • (2) 284” x 102” material wagons with approx. 8000 lb. capacity

FACTORY SUPPORT EQUIPMENT

  • ATLAS COPCO (2014) GA55 FF rotary screw air compressor with 75 HP, 11,265 running hrs, 1479 loaded hrs (all hours as recorded at time of listing), s/n: AP1620144
  • ATLAS COPCO (2011) GA55 FF rotary screw air compressor with 75 HP, 33,641 running hrs, 8005 loaded hrs (all hours as recorded at time of listing), s/n: AP1526566
  • 60’ x 30’ x 20’H outdoor collapsible Quonset hut with lights, roll up door
  • STEELCRAFT (2012) 2200L outdoor fuel tank with FILL-RITE 700 fuel pump & nozzle, s/n: U-010583
  • (2) rolling A-frame gantries with 4000 lb. capacity, 8’ span, 10’ under beam, 3 ton chain hoist
  • 8’ storage container with explosive containment set up, power, exhaust fan

CONVENTIONAL MACHINE TOOLS

  • JFMT JIMK530 gap bed engine lathe with 21” swing over bed, 60” between centers, speeds to 1500 RPM, 10” 3 jaw chuck, inch/metric threading, quick change tool post, steady rest, coolant, MITUTOYO KA COUNTER DRO, s/n: K4109178
  • TOS FA4A vertical milling machine with 62” x 14” table, speeds to 1400 RPM, 10 HP, FAGOR 3 axis DRO, power table, s/n: 51598
  • MODERN (2016) ZX45 gear head milling & drilling machine with 31" x 9.5" table, speeds to 1970 RPM, 17" max. distance spindle nose to tabletop, 1.5 HP, s/n: 1620037
  • MODERN TOOL (2011) UE-2505-CSA 10” horizontal band saw with 10” x 14” capacity, 1” x 0.035” x 130” blade, coolant, s/n: 11026657
  • DAREX XPS-16 CNC tool sharpener with 3550 RPM
  • KING INDUSTRIAL (2013) 17” floor-type drill press with 14” diameter table, 5/8” chuck, 16 speed, 1 HP, s/n: 534736
  • BEE 6” vertical belt sander
  • DEWALT DW758 8” double end pedestal grinder
  • BALDOR 8102W 8” double end pedestal grinder
  • KING CANADA KC-690 6” double end pedestal grinder
  • SAFETY KLEEN MODEL 34.4 tank-type parts washer

ALSO:

(90+) CAT 40 tool holders; LISTA 13 drawer tool cabinet; (12) A-frame pipe racks; (5) 40’ sea containers; LARGE QUANTITY of pipe stands & racks; welding electrodes; (2) Fireproof highboy cabinets; VARIETY of perishable tooling including DRILLS, CARBIDE INSERT LATHE CUTTERS, CARBIDE INSERTS; power tools; spill kits and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
[email protected]
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
[email protected] or [email protected]
www.omegacb.com