Ateliers d’Usinage PDK Ltee.

Late Model & High Precision CNC Machining Facility

 

Date

Thursday, December 1, 2022

Start Time

10:30 AM EST

Inspection

Tuesday, November 29 and Wednesday, November 30 from 9 AM to 4 PM.

Removal

All assets must be removed no later than Friday, December 16 by appointment only. Rigging details below.

Location

830 Av. Selkirk, Pointe-Claire, Quebec, Canada, H9R 3S3

Industry

Machining
 


Add to Calendar
 

FEATURING: XENA (2016) 30120-6-F, CNC 30”x116” gap bed lathe; DOOSAN (2012) PUMA 400-LC, CNC turning center; DOOSAN (2007) PUMA 300-LC, CNC turning center; DAEWOO (2006) PUMA 300-LC, CNC turning center; MAZAK SLANT TURN 40N 1500 UNIVERSAL, CNC turning center; OKUMA LR25-MY, twin turret CNC turning & live milling center with LIVE TOOLING; MIYANO ATS-80S, CNC opposing spindle turning center; DOOSAN (2007) MV4020/50, CNC vertical machining center; DAEWOO (2005) DMV4020, CNC vertical machining center; HAMAI 5VA, CNC vertical machining center; HYD-MECH H-12, automatic horizontal band saw with hydraulic feed saddle & hydraulic vise; HYD-MECH (2008) S-20 SERIES III, manual horizontal pivot band saw; (2) TOS 71 C, 30”x120” gap bed engine lathes; TOS SN 71 C, 26”x65”gap bed engine lathe; TOS SN 50 C, 20”x64”gap bed engine lathe; SULLAIR (2021) 2209AC, 30 HP rotary screw air compressor with ONLY 2,075 hours; ROYAL BM-5V, vertical milling machine; (3) HANDLING SYSTEMS INTERNATIONAL, ½ ton free standing jib cranes; YALE (2008) GLP050VXNVSE084, 4,800 lb. capacity LPG forklift; LARGE ASSORTMENT of CAT 50 & CAT 40 tool holders; perishable tooling; inspection equipment; shop tables & LISTA-TYPE cabinets; hydraulic power packs; transformers; surplus material & racking and MUCH MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

Montreal Rigging
Rob Marleau
C: 514 781 0404
[email protected]


*For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact [email protected] to set their pick-up appointments upon payment in full.
 
*Further information on removal details can be found in the Terms & Conditions tab or in the Lot Catalogue

CNC LATHE

  • XENA (2016) 30120-6-F CNC gap bed lathe with XENA/FAGOR AUTOMATION CNC touch screen control, 16” 3-jaw chuck, 30” swing over bed, 116” between centers, 6” spindle bore, speeds to 1000 RPM, 20 HP, steady rest, coolant, chip conveyor, 220V/3PH/60HZ, s/n: 1201128

CNC TURNING CENTERS

  • DOOSAN (2012) PUMA 400-LC CNC turning center with DOOSAN-FANUC i SERIES CNC control, 20” 3-jaw chuck, 27.5” swing over bed, 23.22” swing over saddle, 21.65” max. turning diameter, 81.65” max. turning length, 7” spindle bore, 10 station turret, speeds to 1500 RPM, 30 HP spindle motor, programable tail stock, hydraulic steady rest, tool checker arm, coolant, chip conveyor, 220V/3PH/50-60HZ, s/n: ML0134-004507
  • DOOSAN (2007) PUMA 300-LC CNC turning center with FANUC SERIES 2ti-TB CNC control, collet chuck, 22.44” swing over bed, 14.57” swing over saddle, 15.47” max. turning diameter, 50.34” max. turning length, 4.25” spindle bore, 12 station turret, speeds to 2,800 RPM, 35 HP spindle motor, programable tail stock, precision steady rest, tool checker arm, coolant, chip conveyor, 220V/3PH/50-60HZ, s/n: P30L2657
  • DAEWOO (2006) PUMA 300-LC CNC turning center with FANUC SERIES 2ti-TB CNC control, 12” 3-jaw chuck, 22.44” swing over bed, 14.57” swing over saddle, 15.47” max. turning diameter, 50.34” max. turning length, 3” spindle bore, 10 station turret, speeds to 2800 RPM, 35 HP spindle motor, programable tail stock, hydraulic steady rest, coolant, chip conveyor, tool checker arm, 220V/3PH/50-60HZ, s/n: P30L2291
  • DAEWOO PUMA 250-B CNC turning center with FANUC SERIES 18-T CNC control, collet chuck, 8” 3-jaw chuck, 22.44” swing over bed, 14.57” swing over saddle, 15.75” max. turning diameter, 25.60” max. turning length, 3.5” spindle bore, 12 station turret, speeds to 3500 RPM, 25 HP spindle motor, programable tail stock, tool checker arm, parts catcher, coolant, chip conveyor, 220V/3PH/50-60HZ, s/n: PM250107
  • MAZAK SLANT TURN 40N 1500 UNIVERSAL CNC turning center with MAZATROL CNC control, 14” 3-jaw precision chuck, 24” swing over bed, 13” max. turning diameter, 62.2” max. turning length, 3” spindle bore, 15 station turret, speeds to 2200 RPM, 30 HP spindle motor, hydraulic steady rest, coolant, chip conveyor, s/n: 61366
  • MIYANO ATS-80S CNC opposing spindle turning center with FANUC OT CNC control, 24” swing over bed, 12” max. turning diameter, 3.5” spindle bore, 12 station turret, speeds to 3000 RPM, 34 HP spindle motor, coolant, 230V/3PH/60HZ, s/n: n/a
  • LNS HYDROBAR hydrodynamic bar feed with 3” max. bar diameter, 235” max. bar length, s/n: n/a

CNC TURNING & LIVE MILLING CENTER

  • OKUMA LR25-MY twin turret CNC turning & live milling center with OKUMA CNC control, collet chuck, 20.47” swing over bed, 14.57” swing over carriage, 13.39” max. turning diameter, 49.21” max. turning length, 1.5” spindle bore, (1) 12 station turret, (1) 10 station turret, live tooling, speeds to 3500 RPM, 30 HP spindle motor, coolant, chip conveyor, 220-440V/3PH/60HZ, s/n: 0544

CNC VERTICAL MACHINING CENTERS

  • DOOSAN (2007) MV4020/50 CNC vertical machining center with FANUC SERIES 2ti-MB CNC control, 47”x20” table, travels: X – 40.15”, Y – 20.07”, Z – 24.60”, 30” max. distance spindle nose to tabletop, speeds to 8000 RPM, CAT 50 spindle, 20 HP, 24 station ATC, coolant, chip conveyor, 220V/3PH/60HZ, s/n: AV5E3156
  • DAEWOO (2005) DMV4020 CNC vertical machining center with FANUC SERIES 2ti-MB CNC control, 47”x20” table, travels: X - 40”, Y - 20”, Z - 24”, 30” max. distance spindle nose to tabletop, speeds to 8000 RPM, CAT 50 spindle, 20 HP, 24 station ATC, coolant, chip conveyor, 13,452 hours (recorded on meter at time of listing), 220V/3PH/60HZ, s/n: AV5E2216
  • HAMAI 5VA CNC vertical machining center with FANUC SYSTEM 6M CNC control, 47”x22” table, travels: X – 41.3”, Y – 22”, Z – 20”, 26” max. distance spindle nose to tabletop, speeds to 4000 RPM, CAT 50 spindle, 10 HP, 24 station ATC, coolant, chip auger, s/n: n/a

HORIZONTAL BAND SAWS

  • HYD-MECH (2008) S-20 SERIES III manual horizontal pivot band saw with 13”x18” max. cutting capacity, 328 ft/min max. blade speed, 3 HP, sliding material vise, coolant, 96”x17” infeed conveyor, 575V/3PH/60HZ, s/n: 6A0108626
  • HYD-MECH H-12 automatic horizontal band saw with 12”x12” max. cutting capacity, hydraulic feed saddle with 14”/min feed rate, 400 ft/min max. blade speed, 3 HP, hydraulic vise, PLC control, coolant, 84”x16” infeed conveyor, 600V/3PH/60HZ, s/n: A1191013

GAP BED ENGINE LATHES

  • TOS SN 71 C gap bed engine lathe with 30” swing, 120” between centers, 3” spindle bore, speeds to 1000 RPM, inch/metric threading, 20” 4-jaw chuck, steady rest, ACU-RITE DRO, coolant, 575V/3PH/60HZ, s/n: 07007130000021
  • TOS SN 71 C gap bed engine lathe with 30” swing, 120” between centers, 3” spindle bore, speeds to 1000 RPM, 15” 3-jaw chuck, FAGOR DRO, coolant, pneumatic belt sander attachment, 575V/3PH/60HZ, s/n: 471300900061
  • TOS SN 71 C gap bed engine lathe with 26” swing, 65” between centers, 3” spindle bore, speeds to 1000 RPM, inch/metric threading, 10” 3-jaw chuck, ACU-RITE DRO, coolant, pneumatic belt sander attachment, 575V/3PH/60HZ, s/n: 077115960197
  • TOS SN 50 C gap bed engine lathe with 20” swing, 64” between centers, 2” spindle bore, speeds to 2000 RPM, inch/metric threading, 10” 3-jaw chuck, ACU-RITE TURN MATE DRO, coolant, 575V/3PH/60HZ, s/n: 085015950422

CONVENTIONAL MACHINERY

  • ROYAL BM-5V vertical milling machine with 59”x12” table, speeds to 4200 RPM, power feed table, FAGOR 3-axis DRO, coolant, s/n: 9441
  • TOS FGU 32 universal mill with 48”x12” table, speeds to 1000 RPM, 40 taper spindle, arbor attachment, coolant, s/n: 322002070
  • HARDINGE SUPER-PRECISION tool room lathe with 6” swing, approx. 22” between centers, 6 station turret attachment, 230V/3PH/60HZ, s/n: n/a

MATERIAL HANDLING

  • YALE (2008) GLP050VXNVSE084 4,800 lb. capacity LPG forklift with 189” max. lift height, 3-stage mast, side shift, multi-surface tires, 7,935 hours (recorded on meter at time of listing), s/n: B875V02050F
  • HANDLING SYSTEMS INTERNATIONAL ½ ton free standing jib crane with CM SHOPSTAR 1000 lb. capacity electric hoist, 12’ span, s/n: n/a
  • HANDLING SYSTEMS INTERNATIONAL ½ ton free standing jib crane with CM SHOPSTAR 1000 lb. capacity electric hoist, 10’ span, s/n: n/a
  • HANDLING SYSTEMS INTERNATIONAL ½ ton free standing jib crane with CM SHOPSTAR 1000 lb. capacity electric hoist, 7’ span, s/n: n/a

FACTORY SUPPORT EQUIPMENT

  • SULLAIR (2021) 2209AC 30 HP rotary screw air compressor with 1770 RPM, 125 PSI operating pressure, 127 CFM, 2,075 hours (recorded on meter at time of listing), 575V/3PH/60HZ, s/n: 4518022
  • SULLAIR RN250 refrigerated air dryer with 230V/1PH/60HZ, s/n: 3614SA01243
  • AIRTEK 25 HP air compressor, s/n: n/a
  • ESAB PLASMARC PCM-150 portable plasma cutter with cables & gun, s/n: PH-I805083
  • ESAB 452 digital MIG welder with ESAB MIG 4HD wire feeder, cables & gun, s/n: XX-1831113

ALSO:

  • LARGE ASSORTMENT of CAT 50 & CAT 40 tool holders; PERISHABLE TOOLING - carbide insert boring bars, carbide insert lathe cutters, CARBIDE INSERTS, drills, end mills; inspection equipment; shop tables & LISTA-TYPE cabinets; hydraulic power packs; transformers; (2) 5500 lb. capacity pallet jacks; (3) portable welding fume extractors; MACHINE TOOL ACCESSORIES including KURT & CHICK machine vises, 3 & 4 jaw chucks, rotary tables; (10+) sections of medium duty pallet racking; wire mesh parts bins; shop carts; hand tools; rolling tool boxes; surplus material & racking, office furniture and MUCH MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
Interac E-Transfer Payment Instructions

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
[email protected]
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
[email protected] or [email protected]
www.omegacb.com