Complete Ammonia Cooled Glycol Plant

Purchased New in 2010 for Over $6M!

 

Date

Thursday, March 19, 2015

Start Time

10:30 EST

Inspection

Wednesday, March 18, 2015 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.

Removal

Small items: Friday, March 20, 2015 by 5:00 P.M.
Remaining items: Friday, April 3, 2015 by 5:00 P.M.

Industry

Chemical Processing
 

 

http://www.bidspotter.com/en-us/auction-catalogues/corporateassets/catalogue-id-corpor10070

COMPLETE AMMONIA COOLED GLYCOL PLANT FEATURING: TOROMONT/CIMCO (NEW IN 2010 & PURCHASED FOR OVER $6M) ammonia cooled glycol plant consisting of (1) custom packaged 406TR A/C refrigeration system and (1) custom packaged 17TRx2 cooler refrigeration system. Both systems are mounted on structural steel skids, and can be easily disassembled for ease of shipping and re-installation. Systems consist of compressors, cooling tower & chillers, surge drums, condensers, heat exchangers, skidded pump systems, eliminators, water distribution systems, air handling fans, dampers, moisture eliminators, dilution tanks and MORE!

TOROMONT CIMCO (2009) HVAC  AMMONIA/GLYCOL REFRIDGERANT SYSTEM CONSISTING OF:

  • TOROMONT CIMCO (2009) T20-MWFS heat exchanger with -20°F at 300PSIG MAWP,-20°F at 250PSIG (pounds per square inch, gauge) MDMT (minimal design metal temperature) and secondary heat exchanger, s/n 3011-99580
  • TOROMONT CIMCO (2009) high pressure receiver tank with shell side 250PSIG at 500°F MAWP (maximum allowable working pressure), -20°F at 250PSIG MDMT, s/n 8013614
  • TOROMONT CIMCO (2009) hvac surge drum with shell side 250PSIG at 500°F MAWP, -20°F at 250PSIG MDMT, s/n N/A
  • DOUCETTE INDUSTRIES INC CAD5112MSAP-12T(C) HP hvac system heat recovery exchanger with 300PSIG shell working pressure, 150PSIG tube working pressure, s/n 286-C9
  • FRICK (2009) RXF 68H rotary screw compressor unit , r717 refrigerant , max design pressure 300PSIG , RAM INDUSTRIES high efficiency refrigeration motor with 200/290HP at 715-9575RPM , CFM TFD355 blower , FRICK QUANTUM LX controller, FRICK VIPER variable speed drive, s/n 10240M92783241
  • FRICK (2009) RXF 68H rotary screw compressor unit , r717 refrigerant , max design pressure 300PSIG , RAM INDUSTRIES high efficiency refrigeration motor with 200/290HP at 715-9575RPM , CFM TFD355 blower , FRICK QUANTUM LX controller, FRICK VIPER variable speed drive, s/n 10240M92783242
  • FRICK (2009) RXF 68H rotary screw compressor unit , r717 refrigerant , max design pressure 300PSIG , RAM INDUSTRIES high efficiency refrigeration motor, FRICK QUANTUM LX controller, FRICK VIPER variable speed drive, s/n 10240M92783243
  • (2) MFG N/A centrifugal pumps with 25HP WEG electric motors
  • TOROMONT CIMCO hvac controller

TOROMONT CIMCO HVAC AMMONIA/GLYCOL REFRIDGERATION SYSTEM CONSISTING OF:

  • TOROMONT CIMCO (2009) cooler surge drum with shell side 300PSIG at 500°F MAWP, -20°F at 300PSIG MDMT, s/n 8013566
  • TOROMONT CIMCO (2009) glycol cooling / stratification drum with shell side 75PSIG at 100°F MAWP, -20°F 75PSIG MDMT, s/n 8013443
  • TOROMONT CIMCO (2009) M10 BWFD heat exchanger with 300/150PSIG at 180°F MAWP, -20°F at 300/150PSIG MDMT and secondary heat exchanger, s/n 30111-99581
  • TOROMONT CIMCO (2009) M10 BWFD heat exchanger with 300/150PSIG at 180°F MAWP, -20°F at 300/150PSIG MDMT and secondary heat exchanger, s/n 30111-99585
  • FRICK (2009) RXF 15H rotary screw compressor unit with r717 refrigerant, 300PSIG max design pressure, FRICK QUANTUM LX controller, BALDOR RELIANCE SUPER-E 50HP motor at 3450RPM, FRICK VIPER variable speed drive, s/n 30029950660
  • FRICK (2009) RXF 15h rotary screw compressor unit with r717 refrigerant, 300PSIG max design pressure, FRICK QUANTUM LX controller, BALDOR RELIANCE SUPER-E 50HP motor at 3450RPM, FRICK VIPER variable speed drive, s/n 30029950610
  • (2) MFG NA PUMPS with 15HP WEG electric motors
  • TOROMONT CIMCO hvac controller

WATER FILTRATION SYSTEM CONSISTING OF:

  • TOROMONT CIMCO 6x6x8 4380 centrifugal pump with 10HP WEG electric motor, max pressure 175PSI at 225°F, s/n 636697
  • TOROMONT CIMCO 6x6x8 4380 centrifugal pump with 10HP WEG electric motor, max pressure 175PSI at 225°F, s/n 636696
  • TOROMONT CIMCO 6x6x8 4380 centrifugal pump with 10HP WEG electric motor, max pressure 175PSI at 225°F, s/n 636695
  • SONITEC sand filtration unit with VORTISAND holding/filter tank, 4 BELIMO AF120US electric control valves, s/n N/A
  • MFG N/A cooling tower water tank with GREYLINE INSTRUMENTS INC L1T25 level indicating transmitter, EVAPCO conductivity controller, LAKEWOOD INSTRUMENTS 157SE water treatment controller, s/n 10651615

SUPPORT EQUIPMENT

  • TORMONT CIMCO model no. AT 29-624 outdoor chiller unit with (2) EVAPCO PULSE PURE units and (2) BALDOR 20HP fan motors, s/n 9-371160
  • TOROMONT CIMCO 8x6x10 4030 centrifugal pump with 1374GPM US (gallons per minute), 25HP WEG electric motor, max pressure 175PSI at 225°F, s/n 633515
  • TOROMONT CIMCO 8x6x10 4030 centrifugal pump with 1374GPM US, 25HP WEG electric motor, max pressure 175PSI at 225°F, s/n 633515
  • TOROMONT CIMCO 3x1.5x6 4030 centrifugal pump with 73GPM US, 1HP WEG electric motor, max pressure 175PSI at 225°F, s/n 633440
  • TOROMONT CIMCO 3x1.5x6 4030 centrifugal pump with 73GPM US, 1HP WEG electric motor, max pressure 175PSI at 225°F, s/n 633441
  • TOROMONT CIMCO (2009) ammonia dilution tank with shell side non-code 75PSIG at 150°F MAWP, -20°F at 75PSIG MDMT, s/n 8013444
  • TOROMONT CIMCO (2009) hvac glycol stratification tank with shell side non code 75PSIG at 150°F MAWP, -20°F at 75PSIG MDMT, s/n 8013442
  • ARMb (2009) hvac expansion tank with 125PSI at 240°F MAWP, -20°F at 125PSI, s/n N/A
  • (4) MFG N/A centrifugal pumps with 15HP WEG electric motors
  • TOROMONT CIMCO (2009) glycol/ammonia alarm monitor, s/n N/A
  • TOROMONT CIMO ammonia gas detection system s/n N/A

ELECTRICAL EQUIPMENT

  • ALLEN BRADLEY CENTER LINE 2100 motor control center, s/n SNTKTQW47/2
  • ALLEN BRADLEY CENTER LINE control panel enclosure, s/n 2100-EJC1B3B
  • EATON/ CUTLER-HAMMER switch gear unit, s/n 101598
  • (3) REXPOWER MAGNETICS 220KVA transformers
  • (2) REXPOWER MAGNETICS 63KVA transformers
  • (2) MARCUS 175KVA transformers
  • MARCUS 63KVA transformer

AIR FILTRATION

  • FILTER INNOVATIONS G/P 4P4 30/30 2X1 filtration unit, s/n 655831402

OTHER

  • Large quantity of insulated/non insulated plumbing pipe ranging in diameters from 1”-11”, manual and electronic valves ranging in diameters from 1”-11”

ONSITE & ONLINE


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

Payment

A Buyer's Premium of 16% for all onsite bidders and 18% for all Webcast (Remote) bidders will apply at this sale.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

 

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.


Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact pickup@corpassets.com to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
machinerylogistics@fuzelogistics.com
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
buffalo@montyinternational.com
www.montyinternational.com
Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
ralph@omegacb.com or omegacb@omegacb.com
www.omegacb.com