Surplus Assets of

Cooper Standard Industrial and Specialty Group

Plastic Extrusion & Injection Molding Facility

 

Date

Thursday, September 9, 2021

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.

Removal

All assets must be removed no later than Friday, September 24 BY APPOINTMENT ONLY. Please email [email protected] to arrange.

Location

17155 Van Wagoner Road, Spring Lake, Michigan, United States, 49456

Industry

Plastics
 


 

FEATURING: DAVIS STANDARD TERMATIC III 35OS 3.5” single screw extruder; (2) DAVIS STANDARD TERMATIC 35IN35 3.5” single screw extruders; DAVIS STANDARD 25OS 2.5” single screw extruder; DAVIS STANDARD MARK V MV-35INDS35 3.5” single screw extruder; DAVIS STANDARD MARK V MV-30TN25 3” single screw extruder; (2) DAVIS STANDARD DS-20 2” single screw portable extruders; WELEX 250 24:1 AC 2.5” single screw extruder; HARREL CP667DS GEARTRUDER 2” single screw extruder; MAPLAN (2003) MTTF 50P/27C 27.5-ton capacity down acting vertical C-frame type rubber injection moulding machine; MAPLAN (2002) MTTF 100P/40C 45-ton capacity down acting vertical C-frame type rubber injection moulding machine; VAN DORN 35 ET SYSTEM CNC horizontal injection moulding machine; SAGINAW CONTROL SCE-42EL6012WFALP KID KUSION in-line heat bond tape laminator; (2) STRAUB WL30 in-line heat bond tape laminators; MECCO (2009) MECCOMARK 20watt fiber laser parts marking system; (4) CUMBERLAND & FOREMOST grinders; CDS CST 10-24 vacuum tank; (5+) horizontal belt pullers; SHINI (2007) STM-910WE2 digital portable mold temperature controller; WELDOTRON THERMO BOX through type heat shrink tunnel; HUGE ASSORTMENT OF pullers, cut-offs, in-line radiant heaters, portable welders, production support equipment, (2) MITSUBISHI FGC25N 4,750 lbs. capacity LPG forklifts & MUCH MORE!

EXTRUDERS

  • DAVIS STANDARD TERMATIC III 35OS 3.5” single screw extruder with 80” air cooled barrel, (5) zone digital barrel temp control, (5) zone digital die temp control, digital load and speed monitors, 150 HP main drive motor with TOSHIBA H9 variable frequency drive, 7KW rated barrel heaters with 600 degrees F max operating temp, 17.39:1 gear ratio, GENTRAN 439D melt pressure transducer with DRO, 480v/3ph/60hz, s/n G-3973 91154C 
  • DAVIS STANDARD TERMATIC 35IN35 3.5” single screw extruder with 72” air cooled barrel, (5) zone digital barrel temp control, (4) zone digital die temp control, digital load and speed monitors, 50 HP main drive motor with ALLEN BRADLEY 1335 variable frequency drive, 10KW rated barrel heaters with 600 degrees F max operating temp, 17.39:1 gear ratio, GENTRAN 439D melt pressure transducer with DRO, stainless steel gravimetric hopper feeder with PLASTIC PROCESS EQUIPMENT vacuum transport blower, 480v/3ph/60hz, s/n X9815 63881 (LPP-183)
  • DAVIS STANDARD TERMATIC 35IN35 3.5” single screw extruder with 72” air cooled barrel, (5) zone digital barrel temp control, (4) zone digital die temp control, digital load and speed monitors, 75 HP main drive motor with TOSHIBA H9 variable frequency drive, 10KW rated barrel heaters with 600 degrees F max operating temp, 17.39:1 gear ratio, GENTRAN 439D melt pressure transducer with DRO, gravimetric hopper feeder, 480v/3ph/60hz, s/n J3793 9 63 78
  • DAVIS STANDARD 25OS 2.5” single screw extruder with 56” air cooled barrel, (5) zone digital barrel temp control, (4) zone digital die temp control, digital load and speed monitors, 50 HP main drive motor with 5KW rated barrel heaters with 600 degrees F max operating temp, 17.26:1 gear ratio, DYNISCO melt pressure transducer with DRO, stainless steel gravimetric hopper feeder, 480v/3ph/60hz, s/n G8022 92440
  • DAVIS STANDARD MARK V MV-35INDS35 3.5” single screw extruder with 84” air cooled barrel, (4) zone digital barrel temp control, (3) zone digital die temp control, digital load and speed monitors, no main drive motor, 10KW rated barrel heaters with 600 degrees F max operating temp, 17.03:1 gear ratio, 480v/3ph/60hz, stainless steel gravimetric hopper feeder, s/n s-9983 56834
  • DAVIS STANDARD MARK V MV-30TN25 3” single screw extruder with 68” air cooled barrel, (4) zone digital barrel temp control, (5) zone digital die temp control, digital load and speed monitors, 40 hp main drive motor with EMERSON variable frequency drive, 7KW rated barrel heaters with 600 degrees F max operating temp, stainless steel gravimetric hopper feeder with AEC CONAIR side feeder blender, 480v/3ph/60hz, s/n X-9941 56807
  • DAVIS STANDARD DS-20 2” single screw portable extruder with 48” air cooled barrel, (3) zone digital barrel temp control, (2) zone digital die temp control, digital load and speed monitors, 50 HP main drive motor with RELIANCE variable frequency drive, 4.5KW rated barrel heaters with 600 degrees F max operating temp, 6.53:1 gear ratio, 480v/3ph/60hz, s/n P6176
  • DAVIS STANDARD DS-20 2” single screw portable extruder with 48” air cooled barrel, (3) zone digital barrel temp control, (2) zone digital die temp control, digital load and speed monitors, 40 HP main drive motor with RELIANCE variable frequency drive, 4.5KW rated barrel heaters with 600 degrees F max operating temp, 6.53:1 gear ratio, 480v/3ph/60hz, s/n U8834
  • WELEX 250 24:1 AC 2.5” single screw extruder with 48” air cooled barrel, (3) zone digital barrel temp control, (3) zone digital die temp control, digital load and speed monitors, 40 hp main drive motor with TOSHIBA H9 variable frequency drive, 9.3:1 gear ratio, 480v/3ph/60hz, s/n 1864 8 80
  • HARREL CP667DS GEARTRUDER 2” single screw extruder with 48” air cooled barrel, EUROTHERM (4) zone digital barrel temp control, (2) zone EUROTHERM & SOLO digital die temp control, 30 HP main drive motor with TOSHIBA H9 variable frequency drive, KOELLMANN 14:1 gear ratio, stainless steel gravimetric hopper feeder with PLASTIC PROCESS EQUIPMENT vacuum transport blower, GENTRAN (2009) GT76/6J-10K 10,000 PSI melt pressure transducer with DRO, 480v/3ph/60hz, s/n 101

INJECTION MOULDING MACHINES

  • MAPLAN (2003) MTTF 50P/27C 27.5-ton capacity down acting vertical C-frame type rubber injection moulding machine with MAPLAN PLC control, 1.69 oz shot size, 18.125” x 20.125” heated platen, T-stand controls, 480v/3ph/60hz, s/n 1120233
  • MAPLAN (2002) MTTF 100P/40C 45-ton capacity down acting vertical C-frame type rubber injection moulding machine with MAPLAN PLC control, 3.38 oz shot size, 11.75” x 19.70” heated platen, T-stand controls, 480v/3ph/60hz, s/n 1220007
  • VAN DORN 35 ET SYSTEM CNC horizontal injection moulding machine with MANNESMANN DEMAG NC4 CNC control, 35 ton capacity, 11” x 11” tie bar spacing, 16” x 16” platen, 20.9” max daylight opening, 0.8 oz shot size, gravimetric hopper feeder with CONAIR TAAB/0203 vacuum transport blower, YK-HO pick & place pneumatic transfer system, 460v/3ph/60hz,  s/n 7122-0069

HEAT BOND LAMINATORS

  • SAGINAW CONTROL SCE-42EL6012WFALP KID KUSION in-line heat bond tape laminator with RED LION touch screen PLC control, SYLVANIA TUTCO SURE-HEAT 8KW electric torch with ATHENA digital temperature controller, DORNER 3200 SERIES 36” x 8” rubber belt conveyor, liquid cooled steel pressure wheel, 220v/3ph/60hz, s/n 2256007 (LPP-055)
  • STRAUB WL30 in-line heat bond tape laminator with SOLO 4848 digital temperature control, OSRAM SURE JET 8KW electric torch, 2.5” sectional rubber belt, 7” changeover sectional rubber belt, liquid cooled aluminum pressure wheel, 220v/3ph/60hz, s/n 154
  • STRAUB WL30 in-line heat bond tape laminator with CAL 30 digital temperature control, 1.5” sectional rubber belt, 1.5” changeover sectional rubber belt, liquid cooled aluminum pressure wheel, 220v/3ph/60hz, s/n 171

HIGH SPEED LASER PART MARKER

  • MECCO (2009) MECCOMARK 20watt fiber laser parts marking system with WINLASE WINDOWS PC based control, full safety enclosure with shielded view port, 120v/1ph/60hz, s/n S081369  

GRINDER-GRANULATORS

  • CUMBERLAND 12x20 3.5KN grinder granulator with 20 hp drive motor, 12” x 20” aperture, 480v/3ph/60hz, s/n 293400-96515
  • CUMBERLAND 14x20 grinder granulator with 20 hp drive motor, 14” x 20” aperture, 480v/3ph/60hz, s/n 35055-625 (LPP-348)
  • FOREMOST WABASH SHD-2H grinder granulator with 15 hp drive motor, 3.5” x 14” aperture, 460v/3ph/60hz, s/n 38444 (LPP-171)
  • MICHIGAN PLASTICS MACHINERY fly cutter type chopper with digital microprocessor control, 460v/3ph/60hz, s/n n/a (LPP-333)

PRODUCTION SUPPORT EQUIPMENT

  • CDS CST 10-24 vacuum tank with 10” x 240” approx. size, (3) centrifugal circulating pumps, indirect heat exchanger, stainless steel cartridge type filter, digital temperature control, composite see-through lid, top & bottom spray nozzles, analog vacuum and temperature gauges, 480v/3ph/60hz, s/n 470608
  • LOT/ AUXIPLAST stainless steel pneumatic dumper and PLASTIC PROCESS EQUIPMENT pneumatic dumper with pneumatic tray vibrator, s/n n/a
  • MFG UNKNOWN portable welder with 12” throat, s/n n/a (S-4168)
  • MFG UNKNOWN portable in-line cutter with DURANT digital microprocessor control, 5” pneumatic shear, EATON DURANT rotary encoder, DORNER 6” in-feed & out-feed rubber belt conveyors, 120v/1ph/60hz, s/n n/a (LPP451)
  • MFG UNKNOWN 9.5” x 29” in-line horizontal belt puller with LION digital microprocessor control, manual friction adjustment, s/n n/a (MY HOME IS LINE 14)
  • OSCO T-12-211 portable in-line puller with OMRON MINI SP20 digital microprocessor control, 2” pneumatic shear, 120v/1ph/60hz, s/n 9910508013 (TE-005)
  • SHINI (2007) STM-910WE2 digital portable mold temperature controller with OMRON digital microprocessor control, 240v/1ph/60hz, s/n HAD7-6303
  • AEC TDW01M09S4 digital portable mold temperature controller with EUROTHERM digital microprocessor control, 460v/1ph/60hz, s/n 92L5592
  • WITMANN DRYMAX 30 DDMX-C30-70-0 digital portable dryer with CONAIR CAML/LPS stainless steel vacuum feeder, 220v/1ph/60hz, s/n 15567-1
  • DEWALT DW713 10” portable compound miter cold cut saw with 8” x 92” aluminum table, 120v/1ph/60hz, s/n 324004 (SW012)
  • LOT/ (2) MFG UNKNOWN aluminum router table and aluminum profile custom workstation, s/n n/a (LPP-024 & LPP7A)
  • INFRATECH 2000 watt in-line portable radiant infrared heater with ATHENA digital temperature control, 480v/3ph/60hz, s/n 1210 (LPP-225)
  • MFG UNKNOWN in-line portable radiant heater with LOGIC CONTROLS digital temperature control, 480v/3ph/60hz, s/n n/a (LPP-226)
  • DORNER 2M1225C 2” x 84” portable in-line variable speed rubber belt conveyor, 115v/1ph/60hz, s/n 285867 (820)
  • LAUREN MANUFACTURING HBC-001 portable in-line pneumatic shear with 3.75” max width capacity, s/n n/a (HBC-001)
  • MFG UNKNOWN hot plate assembly station, s/n n/a (LAUREN D7398)
  • BERRAN INDUSTRIAL CUSTOM rim strip leak testing station with DVG EAZY SERIES touch screen PLC control, USON QUALITECH 626 digital differential pressure decay tester, pneumatic clamping, 120v/1ph/60hz, s/n HDTL 001826
  • NOVATEC MD-25 digital portable desiccant dryer with 25 cfm capacity, 240v/1ph/60hz, s/n B-2073-0618
  • AWC D45 twin head, variable speed portable wire uncoiler-feeder, 110v/1ph/60hz, s/n n/a (LPP-352)
  • MFG UNKNOWN 6” custom pneumatic shear, s/n n/a (LPP-202)
  • KELMIN 300AA butt welder with 100 degrees C max variable temperature control, pneumatic clamping, 120v/1ph/60hz, s/n D-1100 (LPP-5A)
  • SCHERR TUMICO 22-1500 optical comparator with 14.5” diameter screen, 115v/1ph/60hz, s/n 2-400 (LPP-2A)
  • MFG UNKNOWN TU-100 dual station tape unwinder with frame, s/n n/a
  • LOT/ (3) MFG UNKNOWN fixtures, frames and conveyors, s/n n/a
  • WELDOTRON THERMO BOX through type heat shrink tunnel with FENWALL SERIES 400 analog temperature control, max 700 degrees F rated, 20” wide steel roller conveyor, 22” x 7.5” max aperture size, down draft cooling fans, 480v/3ph/60hz, s/n BUCILLA 040245
  • MFG UNKNOWN approx. 48” x 39” x 12” stainless-steel water-cooling bath with pump, hoses and nozzles, s/n n/a
  • ESI in-line servo puller-cutter with 4” x 6” max profile capacity, servo puller-feeder, servo driven fly cutter type chopper, 480v/3ph/60hz, s/n n/a (LPP-233)
  • CONAIR METAPLAST PC 8-50-SP variable speed puller with CONTREX digital microprocessor control, 1 to 10 fpm rated, pneumatic cylinder pressure, 8” x 60” sectional rubber belt, 480v/3ph/60hz, s/n 990107 (LPP-102)
  • METAPLAST MST-6 10” up-acting cut-off saw with DURANT digital microprocessor control, 460v/3ph/60hz, s/n 590131 (LPP-344)
  • ESI in-line servo puller-cutter with 4” x 6” max profile capacity, servo puller-feeder, servo driven fly cutter type chopper, 480v/3ph/60hz, s/n n/a (VC-011)
  • ESI down cut sliding saw with KOLLMORGEN PLC control, safety cage enclosure, 480v/3ph/60hz, s/n n/a (LPP-172)
  • LOT/ DAVIS STANDARD spare and remanufactured extruder screws, s/n n/a
  • LOT/ (4) GLOBAL INDUSTRIAL MODEL-300625 digital platform scales, s/n n/a
  • TEC POLYMER 18” x 96” approx. stainless-steel water-cooling table with pumps, manifolds, nozzles and control, s/n n/a (LPP-590)
  • MFG UNKNOWN in-line servo puller-cutter with ALLEN BRADLEY PANEL VIEW PLUS 1000 touch screen PLC control, 4” x 1.5” max profile capacity, servo puller-feeder, servo driven shear cutter, safety cage enclosure, 480v/3ph/60hz, s/n n/a (LPP-596)
  • CRAFTSMAN 10” radial arm saw with stand, laser guide, 120-240v/1ph/60hz, s/n BX161164285
  • CRAFTSMAN 10” radial arm saw with stand, 120-240v/1ph/60hz, s/n N024512006
  • DELFIELD ALCO stainless steel double door commercial freezer, 120v/1ph/60hz, s/n n/a (LPP-11A)
  • DELFIELD 6000XL stainless steel single door commercial freezer, 120v/1ph/60hz, s/n n/a (LPP-10A)

FORKLIFTS

  • MITSUBISHI FGC25N 4,750 lbs. capacity LPG forklift with 187” max vertical reach, 3-stage high visibility mast, side shift, cushion tires, approx. 19,622 hours recorded on meter at the time of listing, s/n AF82F40297
  • MITSUBISHI FGC25N 4,750 lbs. capacity LPG forklift with 188” max vertical reach, 3-stage high visibility mast, side shift, cushion tires, approx. 15,176 hours recorded on meter at the time of listing, s/n AF82F01639

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN USD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
Interac E-Transfer Payment Instructions

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
[email protected]
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
[email protected] or [email protected]
www.omegacb.com