Surplus Assets of

Crown Display & News Racks Inc.

Complete Fabricating Facility

 

Date

Thursday, March 10, 2022

Start Time

10:30 AM EST

Inspection

BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.

Removal

All assets must be removed no later than Friday, March 25 by appointment only.

Location

3435 Semenyk Court, Mississauga, Ontario, Canada, L5C 4P9

Industry

Fabricating
 


Add to Calendar
 

FEATURING: ALLSTEEL PIRANHA 6508 65Tx8’ hydraulic press brake; (3) ALLSTEEL 35-6 35Tx6’ hydraulic press brakes; AZTECH 358 35Tx8’ hydraulic press brake; CHICAGO DREISS & KRUMP MODEL 135 15Tx4’ mechanical press brake; (2) FIM GOAL 200/6 7.87”x1/4” hydraulic corner notchers; SIP PP 30 30 KVA spot welder; (2) ACME 30 KVA spot welders; ACME 20 KVA spot welder; ROBOTRON T43B2 30 KVA spot welder; HOLDEN & HUNT 20 KVA spot welder; HOLDEN & HUNT MODEL No3 BUTT 15 KVA butt welder; BROWN BOGGS MODEL 17 ½ J OBI punch press; BROWN BOGGS MODEL L-W OBI punch press; BROWN BOGGS MODEL 14 L OBI punch press; BROWN BOGGS MODEL 13 L OBI punch press; BROWN BOGGS MODEL 13 LW OBI punch press; ALVA ALLEN BT12 OBI punch press; ALVA F ALLEN BT5 OBI punch press; ALVA ALLEN B2 punch press; ALCECO 8-8P C-frame punch press; BROWN BOGGS MODEL 86 L straight side punch press; CUSTOM 12”x144” hydraulic shop press; VOGEL UB-1 ½” cap pneumatic tube bender; BUSY BEE 48” conventional bending rolls; CUSTOM 32” power bending rolls; WYSONG H2652 16GAx52” power shear; BOYAR SCHULTZ SIXTWELVE hydraulic surface grinder; PARMENTER S-16 mechanical kick press riveter; HOBART AC 200 MIG welder; HYSTER S50XM 4450 lbs. LPG forklift; CROWN 2000 lbs. electric walkie type forklift; FS CURTIS 15 hp conventional air compressor; DEVAIR 5 hp conventional air compressor; (2) CUSTOM MFG floor type power nibblers; Large selection of press brake dies and holders; Large quantity of UNIPUNCH C-frame punch holders with complement of punches and dies; Power tools, hand tools, table saws and table routers; Large selection of medium and heavy duty racking, raw material stock, hydraulic pallet trucks and MORE!

THE EXCLUSIVE RIGGER FOR THIS SALE IS:

National Rigging and Transportation
Darren Chapman
O: 905-788-1110 • C: 905-704-9011
[email protected]


*For everyone’s safety removal at this site is conducted strictly by appointment only. All machinery buyers must contact [email protected] to set their pick-up appointments upon payment in full.

PRESS BRAKES

  • ALLSTEEL PIRANHA 6508 hydraulic press brake with 65 ton x 8’ capacity, 78” between housings, 6” adjustable stroke, 15” max open height, 8” throat, 10 hp hydraulic power pack, 600V/3PH/60HZ, s/n 1031
  • ALLSTEEL 35-6 hydraulic press brake with 35 ton x 6’ capacity, 62” between housings, 4” adjustable stroke, 11.5” max open height, 6” throat, 7.5 hp hydraulic power pack, MICROGUARD safety light curtains, 600V/3PH/60HZ, s/n 35572
  • ALLSTEEL 35-6 hydraulic press brake with 35 ton x 6’ capacity, 62” between housings, 4” adjustable stroke, 11.5” max open height, 6” throat, 7.5 hp hydraulic power pack, MICROGUARD safety light curtains, 600V/3PH/60HZ, s/n 35576
  • ALLSTEEL 35-6 hydraulic press brake with 35 ton x 6’ capacity, 62” between housings, 4” adjustable stroke, 11.5” max open height, 6” throat, 7.5 hp hydraulic power pack, 600V/3PH/60HZ, s/n 35569
  • AZTECH 358 hydraulic press brake with 35 ton est. x 6’ capacity, 76” between housings, 5” adjustable stroke, 12” max open height, 8” throat, 10 hp hydraulic power pack, 600V/3PH/60HZ, s/n n/a
  • CHICAGO DREISS & KRUMP MODEL 135 mechanical press brake with 15 ton x 4’ capacity, 31” between housings, 2” stroke, 3” ram adjustment, 8” max open height, 6” throat, 575V/3PH/60HZ, s/n L12696

HYDRAULIC CORNER NOTCHERS

  • (2) FIM GOAL 200/6 hydraulic corner notchers with 7.87”x7.87”x1/4” capacity, 575V/3PH/60HZ, s/n 773; 896

SPOT WELDERS

  • SIP PP 30 30 KVA floor type spot welder with foot pedal control, 40” throat, liquid cooling, 600v, s/n 07512
  • ACME 30 KVA floor type spot welder with ROBOTRON control, 40” throat, liquid cooling, 575v, s/n n/a
  • ACME 20 KVA floor type spot welder with ROBOTRON control, 32” throat, liquid cooling, 575v, s/n 8719
  • ROBOTRON T43B2 30 KVA floor type spot welder with ROBOTRON control, 32” throat, liquid cooling, 575v, s/n C355TA-2
  • HOLDEN & HUNT 20 KVA floor type spot welder with analog control, 28” throat, liquid cooling, 575v, s/n 122S
  • ACME 30 KVA floor type spot welder with ROBOTRON control, 36” throat, liquid cooling, 575v, s/n 6486
  • HOLDEN & HUNT MODEL No3 BUTT 15 KVA capacity butt welder, 550v, s/n 5942

PUNCH PRESSES

  • BROWN BOGGS MODEL 17 ½ J OBI mechanical punch press with 16”x21” ram, 22”x32” bolster, 575V/3PH/60HZ, s/n 11543
  • BROWN BOGGS MODEL L-W OBI mechanical punch press with 10”x10” ram, 22”x32” bolster, 575V/3PH/60HZ, s/n n/a
  • BROWN BOGGS MODEL 14 L OBI mechanical punch press with 10”x10” ram, 14”x22” bolster, 575V/3PH/60HZ, s/n 6644
  • BROWN BOGGS MODEL 13 L OBI mechanical punch press with 8”x8” ram, 12”x20” bolster, 575V/3PH/60HZ, s/n 3650
  • BROWN BOGGS MODEL 13 LW OBI mechanical punch press with 8”x8” ram, 14”x22” bolster, 575V/3PH/60HZ, s/n n/a
  • ALVA ALLEN BT12 OBI mechanical punch press with 12 ton capacity, 575V/3PH/60HZ, s/n 2909S
  • ALVA F ALLEN BT5 OBI mechanical punch press with 5 ton capacity, 575V/3PH/60HZ, s/n A3352372
  • ALVA ALLEN B2 mechanical punch press with 2 ton capacity, 575V/3PH/60HZ, s/n MFG4122
  • ALCECO 8-8P C-frame mechanical punch press, 575V/3PH/60HZ, s/n n/a
  • BROWN BOGGS MODEL 86 L straight side mechanical punch press with 12”x46” ram, 18”x52” bolster, 575V/3PH/60HZ, s/n 7237
  • CUSTOM 12”x144” hydraulic shop press with power pack, 575V/3PH/60HZ, s/n n/a

CONVENTIONAL MACHINERY

  • VOGEL UB-1 pneumatic tube bender with ½” @ 120 psi max capacity, s/n 1084035
  • BUSY BEE 48” conventional bending rolls with stand, s/n n/a
  • CUSTOM 32” power bending rolls, s/n n/a
  • WYSONG H2652 power shear with 16 GA x 52” capacity, back gauge and squaring arm, 575V/3PH/60HZ, s/n H52-793
  • BOYAR SCHULTZ SIXTWELVE hydraulic surface grinder with 6”x12” magnetic chuck, hydraulic power pack, 575V/3PH/60HZ, s/n n/a
  • PARMENTER S-16 mechanical kick press riveter, s/n 3330
  • HOBART AC 200 portable MIG welder with HOBART 17A wire feeder, cables and gun, 230/460/575v, s/n 82WS02437 (GAS BOTTLES NOT INCLUDED)

ROLLING STOCK

  • HYSTER S50XM LPG forklift with 4450 lbs. capacity, 189” max vertical reach, 3-stage high visibility mast, side shift, cushion tires, approx. 9980 hours recorded on meter at the time of listing, s/n D187V09828V
  • CROWN 2000 lbs. capacity electric walkie type forklift with 106” max vertical reach, cushion tires, s/n 1A155461

FACTORY EQUIPMENT

  • FS CURTIS FCA1SE1SH1S-A8L1XX 15 hp tank mounted air compressor, 575V/3PH/60HZ, s/n CA1SE1SD1SG18
  • DEVAIR TAPV-5052 5 hp tank mounted air compressor, 575V/3PH/60HZ, s/n 4417405

ALSO:

  • (2) CUSTOM MFG floor type power nibblers, large selection of press brake dies and holders, large quantity of UNIPUNCH C-frame punch holders with complement of punches and dies, power tools, hand tools, table saws, table routers, large selection of medium and heavy duty racking, raw material stock, hydraulic pallet trucks and MORE!

LIVE WEBCAST ONLY


Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
THIS SALE WILL BE CONDUCTED IN CAD.
 
Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
 
To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

 

  1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
  2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
 

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.
 
For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
 
For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

 

 

  • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
  • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
  • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

 

 

 
The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
Download Full Payment Information
Download Buyer Deposit Form
CAD Wire Transfer Details
USD Wire Transfer Details
Interac E-Transfer Payment Instructions

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
 
Please read our Full Terms & Conditions for Removal Requirements

 

 
Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

 

Rigger Release Authorization Form

 

Sample of 'Certificate of Insurance' or 'CI'

 

 

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers
Bill Clune or Melanie Koerber
716.875.5100 EXT 105
[email protected]
www.montyinternational.com		 Omega Customs Brokers Inc
Ralph Ronderos
305.592.5656 EXT 1005
[email protected] or [email protected]
www.omegacb.com