Duradie Technologies Inc.

30,000+ Sq. Ft. Heavy Stamping & CNC Machining Event

FEATURING: FOUR STAR (2014) FD-2842/5F 5-axis bridge-type CNC vertical machining center; FIRST (2018) V2000 CNC vertical machining center; DAHLIH DL – MCV 2100 CNC vertical machining center; DAHLIH DL - MCV 1500 CNC vertical machining center; DAHLIH DL - MCV 1350 CNC vertical machining center; DAHLIH HC-2000 CNC horizontal machining center; DAHLIH DL-MCH-500 twin pallet CNC horizontal machining center; STANKO 2B622/4-09 5” CNC table-type horizontal boring mill; CLEARING F-41250-144 1250 TON straight side press; VERSON S-4-1000-136-1027 1000 TON straight side press; DANLY S52-300-108-84 300 TON straight side press; DANLY S-4-300-120-72 300 TON straight side press; NTC TLM610CWST 5-axis CNC bridge-type laser cutting machine; FLOW 712127-1 CNC cantilever-type water jet cutting system; SODICK AP600 CNC wire EDM; SODICK AQ535LH CNC wire EDM; SODICK AQ325L CNC wire EDM; MICROWEILY (2001) TY-1630S engine lathe; FIRST LC-20VHS universal milling machine; (3) FIRST vertical turret mills; STANKO 2A576 9’ radial arm drill; STANKO 2A554 6’ radial arm drill; (2) KAO MING KMR-1600DH 6’ radial arm drills; ERCO TS-25/32 gear head drill; BAXTER VERTICUT 360SAHD horizontal band saw; BAXTER VERTICUT 1153 roll-in type vertical band saw; T-JAW 700 vertical band saw; CHEVALIER FSG-1640AD hydraulic surface grinder; CHEVALIER FSG-1224ADII hydraulic surface grinder; (2) CHEVALIER FSG-618M surface grinders; CHING YIH U2 tool cutter grinder; CAROLINA CBP5500 55 TON capacity hydraulic shop press; PACIFIC 8’ x 14 GA 10 TON capacity hydraulic press brake; PROMECAM 10’ hydraulic shear; PRECISION AVA2 100 KVA spot welder; HYPERTHERM POWERMAX 800 portable plasma cutter; LINCOLN ELECTRIC SQUAREWAVE TIG 255 digital tig welder; NEDERMAN portable fume extractor; MFG UNKNOWN 48” manual finger brake; SULLAIR LS12-50H ACAC 52 HP air compressor; CHAMPION 25 HP air compressor; AIRTEK SC220 air dryer; CONCEPT 14 oil/water separator; FLANDERS air seal dust collector; TAYLOR RM60 LPG forklift; LOWRY INDUSTRIAL FKS75 SPECIAL LPG forklift; HYSTER S120XLS LPG forklift; CLARK C500-55 LPG forklift; DEA IOTA 2204 bridge-type CMM; FANAMATION four-post type CMM; LARGE SELECTION OF CAT 50 & #50 tool holders; perishable tooling including drills, end mills, reamers, taps, carbide cutters, carbide inserts & boring bars; inspection equipment comprising of outside micrometers, vernier calipers, gauge blocks, precision fixtures & MITUTOYO 50.5” X 43.5” X 8” black drilled and tapped granite surface plate; die lifting carts; machine tool accessories consisting of set-up tooling, machine vises, angle plates, rotary tables, indexing heads, precision quick-clamp fixture plates, clamping & accessories; shop tables, heavy duty metal stands, toolboxes; SELECTION OF hand tools, power & pneumatic tools, grinders, drill presses & cut off saws; pallet racking & cantilever racking; office furniture, business machines and MUCH MORE!

Rigging and Removal Details

THE EXCLUSIVE RIGGER FOR THIS SALE IS:
Lalonde Machinery Movers
Ian Lalonde
Office: 416-285-0024  | Cell- 905-914-1503
[email protected]

*Further information on removal details can be found in the Terms & Conditions tab or in the Lot Catalogue.


TRUCKING AND TRANSPORT SERVICES:

Trucking and transport services, including cross-border logistics, are available through Fuze Logistics Inc. Please contact Chris Tan for a firm quote or any questions regarding transportation.

Fuze Logistics Services Inc.
Chris Tan
514.799.4162
[email protected]

5-AXIS BRIDGE-TYPE CNC VERTICAL MACHINING CENTER

• FOUR STAR (2014) FD-2842/5F 5-axis bridge-type CNC vertical machining center with FANUC SERIES Oi-MD CNC control, 157.5” X 87” t-slot table, travels: X-165.35”, Y-110.23”, Z-43.30”, 112.20” between columns, speeds to 6,000 RPM, CAT 50 taper spindle, 60-station ATC, automatic head changer with straight and 2-axis CNC controlled universal head, optional laser tool setter, through spindle coolant, chip augers and conveyor, (2) 81.5” X 77.5” precision quick-clamp fixture plates (may be sold separately), 220V/3PH/60HZ, s/n FD2814002

CNC VERTICAL MACHINING CENTERS

• FIRST (2018) V2000 CNC vertical machining center with FANUC SERIES Oi-MF 5-axis ready CNC control, 39.25” x 86.75” t-slot table, travels: X-86.61”, Y-39.37”, Z-27.55”, 47” between columns, speeds to 10,000 RPM, 32-station ATC, CAT 50 taper spindle, high pressure through spindle coolant, chip auger, optional HEXAGON wireless tool setter, 575V/3PH/60HZ, s/n 70100087
• DAHLIH (2001) DL - MCV 2100 CNC vertical machining center with FANUC SERIES 18-M CNC control, 35” x 90” t-slot table, travels: X-82.7”, Y-33.5”, Z-29.9”, CAT 50 taper spindle, 32-station ATC, speeds to 3,500 RPM, coolant, chip auger, s/n 21000213
• DAHLIH (2003) DL – MCV 1500 CNC vertical machining center with FANUC SERIES 18-M CNC control, 26.75” x 67” t-slot table, travels: X-59”, Y-25”, Z-27.6”, speeds to 3,500 RPM, 40-station ATC, CAT 50 taper spindle, high pressure through spindle coolant, chip auger, s/n 3001060010
• DAHLIH DL - MCV 1350 CNC vertical machining center with FANUC SERIES O-M CNC control, 26.75” x 67” t-slot table, travels: X-53”, Y-25”, Z-27.6”, speeds to 3,500 RPM, 24-station ATC, CAT 50 taper spindle, coolant, chip auger, s/n N/A

CNC HORIZONTAL MACHINING CENTERS

• DAHLIH HC-2000 CNC horizontal machining center with FANUC SERIES 18-M CNC control, 90.5” x 31.5” t-slot table, travels: X-78.7”, Y-39.4”, Z-39.4”, speeds to 3,500 RPM, CAT 50 taper spindle, 60-station ATC, coolant, chip conveyor, optional auxiliary vertical table with splash guards, 575V/3PH/60HZ, s/n 0010
• DAHLIH (2006) DL-MCH-500 twin pallet CNC horizontal machining center with FANUC SERIES 21i-MB CNC control, (2) 19.68” x 19.68” pallets, travels: X-29.25”, Y-26.77”, Z-23.62”, B-360 degrees positioning in 1 degree increments,  speeds to 6,000 RPM, CAT 50 taper spindle, 60-station ATC, through spindle coolant, chip conveyor, s/n 3003010206

CNC TABLE TYPE HORIZONTAL BORING MILL

• STANKO 2B622/4-09 CNC 5” table-type horizontal boring mill with retrofit GE FANUC SERIES 16-M CNC control, 49” x 63” t-slot rotary table, travels: X-39.37”, Y-78.74”, Z-27.95”, W-30”, B-360 degree positioning,  speeds to 2,000 RPM, CAT 50 taper spindle, coolant, s/n 261

5-AXIS CNC BRIDGE-TYPE LASER CUTTING MACHINE

• NTC TLM610CWST 2000 WATT capacity 5-axis CNC bridge-type laser cutting machine with TDLC-04R CNC control, 74.80” x 122” t-slot table, travels: X-122.04”, Y-74.80”, Z-31.49”, B-200 DEG, W-360 DEG, PRC 2200 laser power source with approx. 35,450 hours recorded on meter at the time of listing, (2) 29.5” x 72”, FLANDERS dust collector, KOOLANT KOOLERS liquid chiller, (1) 48” x 72” precision quick-clamp fixture plates (may be sold separately), full complement of spare parts and accessories, s/n 50036

CNC CANTILEVER-TYPE WATER JET CUTTING SYSTEM

• FLOW 712127-1 CNC cantilever-type water jet cutting system with FLOWCUT CNC control, 81” x 168” table, 55,000 PSI max intensifier pump pressure, 2” max material thickness, travels: X-145”, Y-72.5”, Z-7.5”, CNC controlled bevelling head, cyclonic media recovery, 460V/3PH/60HZ, s/n 297594

CNC WIRE EDMS

• SODICK AP600 CNC wire EDM with SODICK MARK 25 CNC control with travels; X- 23.6”, Y- 15.7”, Z-7.8”, U-2.7”, V-2.7” tank dimensions 40.25” x 32.5” x 9.5”, 33” x 16.5” worktable, 1984 lbs. max workpiece weight, dielectric tank with filtration, 210V/3PH/60HZ, s/n CO65
• SODICK AQ535LH CNC wire EDM with SODICK LN1W CNC LINEAR SERVO control with travels; X-21.7”, Y-13.8”, Z-11.8”, U-3.1”, V-3.1”, tank dimensions 48.5” x 28.5” x 18”, 30.5” x 18” worktable, 1764 lbs. max workpiece weight, dielectric tank with filtration, 208V/3PH/60HZ, s/n T-0240
• SODICK AQ325L CNC wire EDM with SODICK LQ33W CNC control, travels; X- 13.7”, Y- 9.8”, Z-8.6”, U-3.1”, V-3.1”, 24.5” x 32” x 10” tank dimension, 23.6” x 15.7” worktable, 990 lbs. max workpiece weight, dielectric tank with filtration, 210V/3PH/60HZ, s/n 2254

WIRE AND TUBE BENDING MACHINE

• OMCG 1400 multi-slide wire and tube bending machine with 55” max wire feed length, 0.315” max wire diameter, 0.984” flat steel width, 0.118” flat steel thickness, 3-105 strokes/min adjustment stoke, 4 KW double pole drive, s/n 14949

STRAIGHT SIDE STAMPING PRESSES

• CLEARING F-41250-144 1250 TON capacity straight side stamping press with manual controls, 84” x 144” bolster, 79”x144” ram, 24” stroke, 60” max shut height, 16” adjustment, 14 SPM, 31.25” x 58” window opening, lower air cushions, air clutch, s/n 50-16682-P
• VERSON S-4-1000-136-1027 1000 TON capacity straight side stamping press with RETROFIT COMMAND STAMP control, 102” x 136” ram and bolster, 24” stroke, 57.375” max shut height, 12 SPM, 60” x 48” windows, safety light curtains, air clutch, s/n 12134
• DANLY S52-300-108-84 300 TON capacity straight side stamping press with RETROFIT SIEMENS variable speed control, 84” x 108” ram and bolster, 18” stroke, 8” adjustment, 50” shut height, 20 SPM, SPECTRA safety light curtains, air clutch, s/n 55088301
• DANLY S-4-300-120-72 300 TON capacity straight side stamping press with manual controls, 72” x 120” ram and bolster, 18” stroke, 18” adjustment, 44.5” shut height, 30 SPM, 41.5” X 36” window opening, MICROGUARD light curtains, air clutch, s/n N/A

CONVENTIONAL MACHINE TOOLS

• CHEVALIER FSG-1640AD automatic hydraulic surface grinder with 10” grinding wheel, 40” x 16” KIN JUNG electromagnetic chuck, incremental down feed, coolant with paper filtration, 575V/3PH/60HZ, s/n G4836005
• CHEVALIER FSG-1224ADII automatic hydraulic surface grinder with 13” grinding wheel, 24” x 12” WALKER-HAGOU electromagnetic chuck, incremental down feed, coolant with paper filtration, 575V/3PH/60HZ, s/n FA91A003
• (2) CHEVALIER FSG-618M surface grinders with 8” grinding wheel, 18” x 6” WALKER-HAGOU magnetic chuck, incremental down feed, 575V/3PH/60HZ, s/n A3828069; A3831046
• MICROWEILY (2001) TY-1630S engine lathe with 8” 3 jaw chuck 16” swing over bed, 30” between centers, speeds to 2000 rpm, 2” spindle bore, coolant, 575V/3PH/60HZ, s/n A8911-016
• FIRST LC-20VHS universal milling machine with 10” x 51” t-slot table, # 40 spindle taper, speeds to 4500 rpm, s/n 84060421
• (3) FIRST vertical turret mills with 10” x 50” t-slot table, R8 spindle taper, speeds to 4500 rpm, HEIDENHAIN 2-axis DRO, s/n 70102799; 10604651; 10604650
• STANKO 2A576 9’ radial arm drill with 21” column, speeds to 1800 rpm, (2) 25” x 31” x 19.75” box tables, 220V/3PH/60HZ, s/n 267
• STANKO 2A554 6’ radial arm drill with 12” column, speeds to 1550 rpm, 25” x 31” x 19.5” box table, s/n 9206
• (2) KAO MING KMR-1600DH 6’ radial arm drills with 16” column, speeds to 1580 rpm, 19.5” x 29.25” x 16” bot table, s/n 60310; n/a
• ERCO TS-25/32 gear head drill with speeds to 2520 rpm, s/n 1813-6098
• BAXTER VERTICUT 360SAHD horizontal band saw with 22.5” manual clamping, speeds to 600 rpm, 5HP motor, coolant, 575V/3PH/60HZ, s/n n/a
• BAXTER VERTICUT 1153 roll-in type vertical band saw with ¾ HP motor, 115V/1PH/60HZ, s/n 4227
• T-JAW 700 vertical band saw with blade welder, 575V/3PH/60HZ, s/n 9370063
• CHING YIH U2 tool cutter grinder, 110V/1PH/60HZ, s/n 0452
• CAROLINA CBP5500 55 TON capacity hydraulic shop press, s/n 53941

FABRICATING EQUIPMENT

• PACIFIC 8’ x 14 GA 10 TON capacity hydraulic press brake, s/n 2585
• PROMECAM 10’ hydraulic shear with 10’ X 5/16” capacity, front-operated power back gauge, s/n 6063080234
• PRECISION AVA2 100 KVA spot welder with 18” throat, 440V/60HZ, s/n 065107
• KENT 10-135PMH portable coil end welder with 10” max width, .135” max thickness, hydraulic shearing & clamping, LINCOLN ELECTRIC SQUARE WAVE 175 PRO TIG welder, s/n N/A
• HYPERTHERM POWERMAX 800 portable plasma cutter, s/n 800-018487
• LINCOLN ELECTRIC SQUAREWAVE TIG 255 digital tig welder with LINCOLN ELECTRIC chiller and cables and gun, s/n U1970511491
• NEDERMAN portable fume extractor, s/n 663
• MFG UNKNOWN 48” manual finger brake, s/n n/a

FACTORY SUPPORT EQUIPMENT

• SULLAIR LS12-50H ACAC 52 HP air compressor with 115/125 PSIG max air rated, 33,939 hours (recorded on meter at time of listing), 575V/3PH/60HZ, s/n 003-111234
• CHAMPION 25 HP air compressor with speeds to 1,760 RPM, 575V/3PH/60HZ, s/n N/A
• AIRTEK SC220 air dryer with 200 PSIG max pressure, 220 SCFM capacity, 230V/1PH/60HZ, s/n 97-77651
• CONCEPT 14 oil/water separator, s/n N/A
• FLANDERS air seal dust collector, s/n N/A

ROLLING STOCK

• TAYLOR 60 LPG heavy forklift with 60,000 LB capacity, single stage mast, cushion tires, s/n 60-601
• LOWRY INDUSTRIAL FKS75 SPECIAL LPG forklift with 20,000 LB capacity, 100” max vertical reach, 2-stage mast, cushion tires, 3,658 hours (recorded on meter at time of listing), s/n 16784
• HYSTER S120XLS LPG forklift with 7,000 LB capacity, 3-stage mast, 160” max vertical reach, cushion tires, side-shift, hydrostatic transmission, 6,655 hours (recorded on meter at time of listing), s/n D004D04338U
• CLARK C500-55 LPG forklift with 4,950 LB capacity, 188” max vertical reach, 3-stage mast, cushion tires, s/n 355-73-3557
• SKYJACK 24V electric scissor lift with 850 lb. capacity, 32’ work height, 84” x 42” platform, on-board charger, s/n: n/a

COORDINATE MEASURING MACHINES

• DEA IOTA 2204 bridge-type CMM with 53.5” x 106.75” granite table, 43.5” between columns, RENISHAW PH9 touch probe, CHECKMATE V10 WINDOWS PC based control and data acquisition software, joystick pendant control, s/n N/A (ID CMM-02)
• FANAMATION four-post type CMM with 63.5” x 120” granite table, 49.25” between columns, (RBE 2023 - $26,900 CAD replacement cost) RENISHAW PH10T touch probe, PCDMIS V3.7 WINDOWS PC based control and data acquisition software, joystick pendant control, s/n N/A (ID CMM-01)

ALSO:

• LARGE SELECTION OF CAT 50 & #50 tool holders; perishable tooling including drills, end mills, reamers, taps, carbide cutters, carbide inserts & boring bars; inspection equipment comprising of outside micrometers, vernier calipers, gauge blocks, precision fixtures & MITUTOYO 50.5” X 43.5” X 8” black drilled and tapped granite surface plate; die lifting carts; machine tool accessories consisting of set-up tooling, machine vises, angle plates, rotary tables, indexing heads, precision quick-clamp fixture plates, clamping & accessories; shop tables, heavy duty metal stands, toolboxes; SELECTION OF hand tools, power & pneumatic tools, grinders, drill presses & cut off saws; pallet racking & cantilever racking; office furniture, business machines and MUCH MORE!