Former Assets of a

Large Papermill Event

Major 2-Day & Multi-Million Dollar Paper Mill Event!

 

Date

Wednesday, September 2, 2020 - Thursday, September 3, 2020

Start Time

10:00 AM CDT
 

Inspection

BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.

Removal

All assets must be removed no later than Friday, October 1 by appointment only.

Location

Former Fort Frances Pulp & Paper Mill, Fort Frances, Ontario, Canada, P9A 3P9

Industry

Forestry / Pulp & Paper
 

 


 

A brief summary of assets include: (3) Fine White Paper Machines w/ related production support equipment; Complete Pulp Mill w/ related production support equipment; Stone Ground Wood Mill w/ related production support equipment; Huge Quantity of Electrical Power Distribution Equipment; Assortment of Machining & Fabricating Equipment; Rolling Stock & Material Handling Equipment; Waste Water Treatment Facility; HUGE QTY OF MRO spares; Factory Support Equipment & MUCH MORE!
 

TO VIEW THE LOTS:

DAY 1 | Lots 0001-0799   DAY 2 | Lots 0800-1688   

* IMPORTANT INFORMATION REGARDING INSPECTION AND REMOVAL *

**FOR INSPECTION AND REMOVAL MANDATORY CLASS 3 HIGH VISIBILITY SAFETY APPAREL (HVSA) WILL BE ENFORCED.

APPAREL INCLUDES: Steel Toe Footwear, Hard Hats with Retro-Reflective Tape, Safety Glasses, as well as 360° HVSA Coveralls. Due to health and safety requirements, all visitors must wear a MASK and GLOVES while onsite.

If you plan to inspect the assets, an appointment must be made. There will be no exceptions.

THE EXCLUSIVE RIGGER FOR THIS SALE IS:
Ex Trans Cargo Inc.
Kerry-Ann Labranche
Direct Line: 1.514.894.5644
[email protected]

REMOVAL AT THIS SITE IS CONDUCTED STRICTLY BY APPOINTMENT ONLY. BUYERS CAN CONTACT THE MOVER DIRECTLY AT 514.894.5644 OR [email protected] TO SET THEIR PICK-UP APPOINTMENTS UPON PAYMENT IN FULL.
Rigging Fees for small items that can be hand carried out can be removed if desired. Please contact the auctioneer after receiving your invoice to have “hand carry” rigging fees removed if needed.

PAPER MACHINES

PM#7:

  • PM#7 paper machine with 3360 fpm, 450tpd, 56gsm sheet capacity consisting of BELOIT BEL-BAIE III stainless steel headbox with gap type former with 242” wire width; BELOIT tri-nip suction pick-up roll press design with 1st section - suction & grooved roll, 2nd section - suction & granite roll, 3rd section - granite & grooved roll with double doctor on granite roll; BELOIT 3-section dryer with (36) 235" wide x 60" diameter dryers, 1st section UNIRUN, 2nd & 3rd section - double felted; BELOIT hot water roll breaker stack with 2 roll stack design; RYECO sheet break detector; DOMINION ENGINEERING calender roll stack; BELOIT 4th section dryer with (36) 235" wide x 60" diameter dryers - double felted; HONEYWELL SERIES 4000 scanner; BELOIT 3345 reel; VALMET KL-1000 double drum winder with 212” max trim width, 6500 fpm capacity; machine controls and integration consisting of console cabinets; drive cabinets; WESTINGHOUSE switchgear cabinet with 8-section RELIANCE drive cabinets with remaining components; CUTLER HAMMER 7-bank motor control center; 36-section RELIANCE drive cabinets with remaining components; WESTINGHOUSE 6-bank breaker cabinets; WESTINGHOUSE 12-bank high voltage motor control center; CUTLER HAMMER 8-bank motor control center; EATON CUTLER HAMMER SVX 9000 50 HP digital VFD’s; HAMMOND 37.5kva transformer and ups battery backup, s/n n/a (MAY BE OFFERED BY COMPONENTS)


    • PM#6:

  • PM#6 paper machine with 2450 fpm, 280tpd, 56gsm sheet capacity consisting of ESCHER-WYSS step diffuser type head box with MEASUREX-DEVRON slice control system; VALMET RICE BARTON design former with 195” width; RICE BARTON design press with suction & granite 1st section, grooved roll & granite second section; GL&V dryer with (34) 190" wide x 60" diameter dryers; BELOIT 4-section hot oil calender; HONEYWELL MEASUREX SERIES 4000-2 scanner; BELOIT reel; VALMET WINBELT winder with 174” max trim width, 7000 fpm capacity; control and drive room cabinets consisting of 7-section control cabinets with remaining components; 20-bank ALLEN BRADLEY ENGINNERED DRIVE SYSTEM cabinets with remaining components; 18-bank ALLEN BRADLEY ENGINNERED DRIVE SYSTEM CABINETS with remaining components; CUTLER HAMMER switchgear unit, balance of electrical room consisting of plc cabinets with remaining components, REX 75kva/460-230v/3ph/60hz dry type transformer, wall mounted ALLEN BRADLEY VDF'S and components, HAMMOND 27kva/600-240/138v/3ph/60hz dry type transformer, REX 45kva/600-208/120v/3ph/60hz dry type transformer, DAYKIN 25kva/575-420v/3ph/60hz dry type transformer, (2) REX 37,5kva/600-120/240v/3ph/60hz dry type transformers, s/n n/a (MAY BE OFFERED BY COMPONENTS)


    • PM#5:

  • PM#5 paper machine with 3250 fpm, 400tpd, 80gsm sheet capacity consisting of BELOIT BEL-BAIE II headbox with gap type former with 196” slice width, max 90 gsm capacity; METSO tri-nip suction pick-up roll press design with 1st section - suction & grooved roll, 2nd section - suction & granite roll, 3rd section - granite & grooved roll with double doctor on granite roll; BELOIT dryer with (42) 190" wide x 60" diameter dryers; BELOIT calender roll stack; HONEYWELL 4000 SERIES II scanner; BELOIT reel; BELOIT double drum winder with 178” max trim width, 6000 fpm capacity; PM5 control and drive room cabinets consisting of CUTLER HAMMER 10-bank motor control center with remaining components; 3-bank ALLEN BRADLEY motor control center with wall mounted TOSHIBA VFD controls; 8-section RELIANCE drive cabinets with remaining components; 6-bank ALLEN BRADLEY ENGINEERED DRIVE cabinets with remaining components; 5-section RELIANCE drive cabinets with remaining components, s/n n/a (MAY BE OFFERED BY COMPONENTS)

    • WOOD HOGS & CHIPPERS

    • BRUNETTE (2012) GRIZZLY MILL 4872-R electric woodchipper with 41.5"x72.5" in feed opening, 45" DIA x 72"L rotor with max 665rpm, twin WESTINGHOUSE 500hp drive motors, s/n: 00400-60
    • CARTHAGE MC-5200-69 left hand log chipper with 112" diameter rotor, 1,500hp electric drive motor and spare 112" diameter rotor assy, s/n: 84411
    • CLARKE'S FALCON HOG 48X60 wood hog with 100 tph capacity, 48"dia rotor, 500 hp electric drive motor, s/n 96040
    • ACROWOOD (REBUILT DINGWELLS 2003) MODEL 6120 woodchipper with 300 hp electric drive motor, MILL-POWER vibratory feeder conveyor, s/n 4756-89
    • GEFFREY WILLIAMS 600HP crusher-pulverizer, s/n: 56806-70
    • GEFFREY WILLIAMS 350HP crusher-pulverizer, S/N: 16918

    CHIP SCREEN

    • RADER (2011) PGM-C523847 disk screen/chip size sorter, s/n: 40855

    HYDRAULIC TRUCK DUMPER

    • RADER hydraulic truck dumper with 80'x9' deck, (3) RADER twin 75hp motor hydraulic power packs, hydraulic cylinders, hydraulic truck dumper control room consisting of 12-bank ALLEN BRADLEY motor control center, (2) control cabinets, and (2) 45kva transformers  s/n: n/a

    CHIP HANDLING

    • B.I.D CANADA (2009) approx. 689'x54" power incline belt conveyor with 265stph design capacity, 200fpm design speed, 50hp drive motor, s/n: n/a (CHIP DUMPER - SCREEN/HOG FEED CONVEYOR)
    • B.I.D CANADA (2009) approx. 550'x42" power incline belt conveyor with 265stph design capacity, 300fpm design speed, 50hp drive motor, s/n: n/a (HOG/SCREEN - ACCEPTS/STORAGE CONVEYOR)
    • B.I.D CANADA (2009) approx. 498'x42" power belt conveyor with 265stph design capacity, 350fpm design speed, 50hp drive motor, (3) PEBCO 15' telescoping discharge chutes, (3) hydraulic actuated gate diverters s/n: n/a (CHIP DUMPER - SCREEN/HOG FEED CONVEYOR)
    • B.I.D CANADA (2009) approx. 1250'x36" power incline belt conveyor with 120stph design capacity, 200 fpm design speed, 50hp drive motor, s/n: n/a (BIOMASS FEED CONVEYOR)
    • B.I.D CANADA (2009) hydraulic in-feed stepping conveyor, s/n: n/a
    • DINGWELLS 44" x 120' approx. powered incline belt conveyor with discharge chute, s/n n/a
    • DINGWELLS 42"x22.5' approx. track mounted horizontal traversing powered belt conveyor with discharge chute, s/n n/a
    • DINGWELLS 24" x 80' approx. powered horizontal belt conveyor with discharge chute, s/n n/a
    • (2) RADER twin 50hp hydraulic power packs, s/n: n/a
    • RADER 350hp electric chip blower with sound enclosure, s/n: 6692
    • SUTORBILT chip blower with 300 hp electric drive motor, s/n n/a
    • ALLIS-CHALMERS G-20LR 800hp rotary-type centrifugal compressor with 16,[email protected], s/n: C-2018
    • RADER (REBUILT PETERSON MACHINE) 25x30 chip feeder, s/n 9424
    • RADER 45X45ESW chip feeder, s/n: E-1225
    • DINGWELL'S (2003) 45X45 chip feeder, s/n: 132086

    MAGNETIC SORTING & SCREENING

    • ERIEZ MAGNETICS (2008) N4-10KW 57" magnetic belt separator, s/n: 196250
    • ERIEZ MAGNETICS SE-7330-MC magnetic separator, s/n 25540
    • ERIEZ MAGNETICS CB-ZS-150 magnetic belt separator, s/n 3537
    • ERIEZ MAGNETICS N4-1241 through-type metal detector, s/n: 48324
    • TECTRONIX SYSTEMS through type continuous metal detector, s/n n/a
    • METAL SHARK STDF1544-09-24 digital through type continuous metal detector, s/n D770782.02G

    DIGESTER TANKS

    • ARJAY INDUSTRIES (1997) L2364.5 stainless steel digester tank with 150 psig @ 400 deg f capacity, 13'dia x 57' height approx. dimensions, s/n: 7525 (DIGESTER #7)
    • E.S. FOX 5.640.141 digester tank with 150 psig @ 350 deg f capacity, 13'dia x 57' height approx. dimensions, s/n: H.6267-5 (DIGESTER #6)
    • (5) HORTON TANK 5.170.682 digester tank with 150 psig @ 350 deg f capacity, 13'dia x 57' height approx. dimensions, s/n: 69H262H05 (DIGESTER #1); 69H262H06 (DIGESTER #2); 5.170.680 (DIGESTER #3); 5.170.678 (DIGESTER #4); 5.170.679 (DIGESTER #5)

    CENTRIFUGAL SCREENS

    • HI-Q CENTRISORTER (2004) HI-Q KNOTTER centrifugal sorter, s/n D137939
    • (4) INGERSOLL RAND CENTRISORTER MODEL 110 B centrifugal screen with 150 hp drive motor, S/N 5237 L; N/A
    • (7) HOOPER PSV-2400 centrifugal pulp screens with 300 hp electric drive motor, s/n 382-71-001; 382-71-003; 382-71-005; 382-71-007; 382-71-008; 382-71-006; N/A
    • (2) HOOPER PSV-2600 centrifugal pulp screens with 300 hp electric drive motor, s/n 382-71-004; 382-71-002
    • BELOIT KD rejects separator core, s/n 99B1209
    • INGERSOLL RAND A4L HI-Q KNOTTER centrifugal sorter core, s/n 95H246
    • (2) BIRD CENTRISORTER centrifugal screens, s/n n/a
    • VOITH SULZER SZ.05 V.S. centrifugal sorter with 30hp electric drive motor, s/n: 3317
    • INGERSOLL RAND IMPCO HI-Q centrifugal sorter with electric drive motor, s/n 5681-L
    • INGERSOLL RAND IMPCO HI-Q centrifugal screen with 40 hp electric drive motor, s/n 63751

    REFINERS

    • SPROUT-BAUER (REBUILT 2004) D42 T.A. double sided pressurized refiner with RELIANCE ELECTRIC 1250hp/594rpm/2300v/3ph/60hz electric drive motor, s/n: 801779A91
    • SPROUT BAUER 4Z TF single side refiner with 1,000 hp electric drive motor, s/n 90T0962

    STOCK WASHERS

    • DECKER APPROX 14'DIA X 21'L stainless steel horizontal drum washer with drive motor, baffles, auger discharge conveyor, composite covers, exhaust ports, s/n n/a
    • LAVALLEY-DECKER STOCK WASHER #45 approx. 14'dia x 21'l stainless steel horizontal drum washer with drive motor, baffles, auger discharge conveyor, composite covers with exhaust ports, s/n n/a
    • LAVALLEY-DECKER STOCK WASHER #35 approx. 14'dia x 21'l stainless steel horizontal drum washer with drive motor, baffles, auger discharge conveyor, composite covers with exhaust ports, s/n n/a
    • LAVALLEY-DECKER STOCK WASHER #25 approx. 14'dia x 21'l stainless steel horizontal drum washer with drive motor, baffles, auger discharge conveyor, composite covers with exhaust ports, s/n n/a
    • LAVALLEY-DECKER STOCK WASHER #15 approx. 14'dia x 21'l stainless steel horizontal drum washer with drive motor, baffles, auger discharge conveyor, composite covers with exhaust ports, s/n n/a
    • LAVALLEY-DECKER stock washer system #1 with (3) approx. 14'dia x 21'l stainless steel horizontal drum washers, drive motors, baffles, auger discharge conveyor, composite covers with exhaust ports, s/n n/a

    WOOD PULP GRINDERS

    • (14) KOEHRING WATEROUS shaft driven heavy duty wood pulp grinders, s/n n/a
    • (6) GE EN73205 5,500hp/257rpm/6600v/3ph/60hz wood pulp grinder electric drive motors, s/n N/A
    • EM WEG-GE 7,000hp/257rpm/13,800v/3ph/60hz wood pulp grinder electric drive motors, s/n XXX459-02

    PROCESS SUPPORT EQUIPMENT

    • GL&V (2012) SERIES 1400 clove rotor pump with 200 hp electric drive motor, s/n G697-R12
    • TRISTAR INDUSTRIES (2011) ALVANA TS-PUMP 1-00-1-CAR clove rotor pump with 200 hp electric drive motor, s/n R120
    • TRISTAR INDUSTRIES (2010) ALVANA EP2 1400-1-CHR clove rotor pump with 200 hp electric drive motor, s/n 414
    • TRISTAR INDUSTRIES (2009) ALVANA TS-PUMP 1-00-1-CAR clove rotor pump with 200 hp electric drive motor, s/n R143
    • TRISTAR INDUSTRIES (2006) ALVANA TS-PUMP 1-00-1-CAR clove rotor pump with 200 hp electric drive motor, s/n 2289
    • TRISTAR INDUSTRIES TS-PUMP 1400-1 clove rotor pump with 200 hp electric drive motor, s/n 455
    • NASH CL-1002 vacuum pump with 50 hp indirect belt drive electric drive motor, s/n 75C0177
    • SULZER (OEM REMANUFACTURED 2011) AM20-15 mixer and INGERSOLL RAND clover pump with KAJANI sampling piston and instrumentation, s/n n/a
    • SUNDS DEFIBRATOR SMB50HX high consistency inline mixer with 200 hp electric drive motor, s/n 000026
    • BELOIT R.D.M 6008 chemical resistant composite inline high consistency mixer with 60 hp electric drive motor, s/n 89-0401
    • MORRIS MPAF 16X16-16 corrosion resistant inline high consistency composite mixer with 75hp electric drive motor, s/n M38763
    • MULLER ACU-THERM (2006) AT80 B-20 heat exchanger with 100 psig mawp @ 200 deg f, 31" maximum compressed dimension, s/n: 356082
    • MULLER ACU-THERM (2005) AT80 B-20 heat exchanger with 100 psig mawp @ 200 deg f, 31" maximum compressed dimension, s/n: 9816400
    • (3) APV CANADA (1998) SR95 heat exchangers with 100 psig mawp @ 250 deg c, 50" maximum compressed dimension, 219 plates, 0.02" thickness, s/n: 9806-1911; 9803-1909; 9303-1910
    • SUPERCHANGER 6-H-P-144 heat exchanger with 100 psig mawp @ 200 deg f, 28" maximum compressed dimension, s/n: 319
    • SLEEGERS ENGINEERING K6027-5 10X53.75 steam heat exchanger with 150psi mawp @ 566 deg f, s/n 94216-1
    • (3) WORTHINGTON 30H1280-1 heavy-duty vertical shaft centrifugal pumps with 12,100gpm capacity, 126't.d.h and 500hp electric drive motors, s/n: 56-012244B; 4C0602-02; 4-0602-05
    • AERCO-GRUNDFOSS steam converter system consisting of (2) AERCO B105 HELITHERM heat exchangers, GRUNDFOSS CR30 high pressure centrifugal pump with 15 hp electric drive motor, s/n n/a
    • STAINLESS STEEL 3-stage starch prep system consisting of hopper feeder with power incline auger conveyor, (3) stainless steel mixing tanks, pumps, valves and control box, s/n n/a
    • (3) CRANSTON 60B028 wire baling strappers with POLO PACKWIRE baling wire coil holder/pay-off, s/n 85004001; 85004002; N/A
    • ALBRIGHT&WILSON K-2 stainless steel rotary type saltcake filter with electric drive motor, s/n 9037
    • (3) ALFA LAVAL CELLENCO CLEANPACK350 4H-32 stainless steel filtration units, s/n n/a
    • (3) LIGHTNIN TDA2-1 (REBUILT PETERSON MACHINE 2009) heavy duty single action mixer agitators with stainless steel shaft, s/n N/A
    • BROKE thickener filtrate system consisting of: (2) GOULDS corrosion resistant pumps; stainless steel buffer holding tank; stainless steel slope screen, s/n n/a
    • DORR-OLIVER CANADA SAVE-ALL rotary drum filter, s/n 10180-7
    • STAINLESS STEEL polymer mixing tank with lightnin single action mixer agitator, s/n n/a
    • STAINLESS STEEL buffer/holding tank, s/n n/a
    • AITKEN skid mounted (4) pump caustic felt wash  system with drip tray, s/n n/a
    • M.L. PROTECH (2007) 4-bank stainless steel canister type filter unit with 150 mawp @ 230 deg f capacity, s/n V3699-1
    • DIVERSEY caustic holding tanks with metering pump, s/n n/a
    • RETENTION acid filter system consisting of RONINNGEN-PETTER 8-bank stainless steel canister filters, M.L. PROTECH 4-BANK stainless steel canister type filter unit with 150 mawp @ 230 deg f capacity, corrosion resistant holding tank, s/n n/a
    • GOULDS 3196 CENTRIFUGAL PUMP WITH ELECTRIC DRIVE MOTOR, S/N N/A
    • CALCOIL skid mounted oil cooler unit consisting of oil holding tank, vertical shaft centrifugal pump, plate heat exchanger, valves and instruments, s/n n/a
    • CLAWSON stainless steel broke & reject pulper with 150 hp electric drive motor, CORELINK AB 90536 core stripper with unwinding table, hydraulic roll splitting guillotine, s/n n/a
    • BLACK CLAWSON stainless steel trim pulper, s/n n/a
    • BLACK CLAWSON 33-1/4 HC stainless steel trim pulper, s/n SNC-1726-C
    • ALFA LAVAL CLEANPAC 300-177 STAINLESS STEEL TERTIARY FILTRATION SYSTEM, S/N 8011
    • INGERSOLL RAND CENTRISORTER CENTRIFUGAL SCREEN WITH ELECTRIC DRIVE MOTOR, S/N N/A
    • GORMANN-RUPP dual stage centrifugal pump with electric drive motor, s/n n/a
    • GORMANN-RUPP T-SERIES self-priming centrifugal pump with electric drive motor, s/n n/a
    • METSO BLOW BOX radiator enclosure with TWIN CITY 20 hp blower fan, s/n N/A
    • (4) IMPCO SAVE-ALL stainless steel horizontal drum type multi stage disk filter systems with variable frequency drive control, spare filter plates, s/n n/a
    • KVAERNER PULPING PMA-36 stainless steel in line high consistency mixer with TOSHIBA 350hp electric drive motor, s/n 715-65-702
    • (2) ULTRA BLEACH 116" twin wire 4-nip presses, s/n 715-43-500 (SOUTH PRESS); 715-43-502 (NORTH PRESS)
    • ALFA LAVAL (2016) CELLECO CENTERDISC stainless steel rotary disk filtration system & thickener, s/n 40-475
    • INGERSOLL RAND IMPCO-3 high consistency bleach mixer with 60 hp electric drive motor, s/n 55-R92
    • INGERSOLL RAND IMPCO/X high consistency bleach mixer with 60 hp electric drive motor, s/n 142

    MILL SUPPORT EQUIPMENT & PLANT ELECTRICAL INFRASTRUCTURE

    • (16+) NASH & SIEMENS heavy duty vacuum pumps with electric drive motors up to 700hp; (150+) GOULDS stainless steel and conventional centrifugal pumps with electric drive motors up to 300 hp; stainless steel knife, gate and ball valves; NELES & KAMYR stainless steel capping valves; large assortment of smaller metering and corrosion resistant pumps; HUGE OFFERING OF PLANT ELECTRICAL INFRASTRUCTURE comprising an assortment of EATON CUTLER HAMMER; WESTINGHOUSE and ALLEN BRADLEY switchgear panels and motor control centers; VFD drive cabinets and controls; hundreds of dry type transformers ranging from 25kva to 800kva

    OUTDOOR PAD-TYPE TRANSFORMERS

    • (2) NEI TYPE 0NAN/ONAF outdoor pad type transformers with 79.2mva/138,000-13,800v/3ph/60hz, s/n: 1194801001; 1194801002
    • (2) WESTINGHOUSE 30mva/138,000-13,800v/3ph/60hz outdoor pad-type transformers, s/n: A3S5872; A3S5871
    • WESTINGHOUSE 20mva/110,000-13,800v/3ph/60hz outdoor pad-type transformer, s/n: A-3S7214
    • (2) WESTINGHOUSE 5000kva outdoor pad type transformers, s/n: 5.13.6.837.68; 5.146.867.71
    • TRANSELECTRIX 5000kva/13800-2400v/3ph/60hz outdoor pad-type transformer, with S&C ELECTRIC switchgear unit, s/n: 32S-0145 
    • WESTINGHOUSE 5000kva/13800-600/347v/3ph/60hz outdoor pad-type transformer, s/n: A-3S 6158
    • (5) WESTINGHOUSE 2000kva/13800-600v/347V/3PH/60HZ outdoor pad-type transformers, s/n: X0-31XXX80; N/A; B-31S-0430; A-31S 0480; B-31S 0479
    • (2) WESTINGHOUSE 2000kva/2400-600-347v/3ph/60hz outdoor pad type transformers, s/n: 90-03E5454-002; 90-03E5454-001
    • (2) ABB HPL145/20C1 145KV high voltage circuit breakers, s/n: 7805-851
    • S&C SERIES 2000 MODEL 2010 high voltage circuit breaker, s/n n/a

    DRY-TYPE TRANSFORMERS

    • POLYGON-JEFFERSON 5,000kva/13,800-2400/1386v/3ph/60hz dry type transformer with WESTINGHOUSE breaker and WESTINGHOUSE switchgear unit, s/n 26490-1
    • TRACON 5,000kva/6,900-2400/1386v/3ph/60hz dry type transformer with FEDERAL PIONEER switchgear unit and FEDERAL PIONEER breaker, s/n 91-6497-1
    • POLYGON-JEFFERSON 2,500kva/13,800-600/347v/3ph/60hz dry type transformer with WESTINGHOUSE breaker and WESTINGHOUSE switchgear unit, s/n 26488-1
    • PLOYGON 2500kva/6900-460/208v/3ph/60hz dry type transformer with switchgear unit and breaker, s/n 15474
    • (2) WESTINGHOUSE 2500kva/13800-600/346v/3ph/60hz dry type transformers with WESTINGHOUSE switchgear unit and WESTINGHOUSE breaker, s/n 89TSA001; 89TSA002
    • WESTINGHOUSE 2500kva/13800-600/346v/3ph/60hz dry type transformer with WESTINGHOUSE switchgear unit and WESTINGHOUSE breaker, s/n 86TSK042
    • (6) WESTINGHOUSE 2,500kva/6,900-600/346v/3ph/60hz dry type transformers with WESTINGHOUSE switchgear unit and WESTINGHOUSE breaker, s/n 88TS0108; 80TSH592; 85TSA476; 84TSJ363; 87TSB041; N/A
    • WESTINGHOUSE 1,500kva/6600-600/347v/3ph/60hz dry type transformer with WESTINGHOUSE switchgear unit and WESTINGHOUSE breaker, s/n 77TZE010
    • HAMMOND 2000kva/6,900-480/277v/3ph/60hz dry type transformer, s/n DB93A
    • HAMMOND 1000kva/13,800/6,900-600/347v/3ph/60hz dry type transformer, s/n DB956
    • HAMMOND HPS 600kva/2400-600/346v/3ph/60hz dry type transformer, s/n A10DB321
    • HAMMOND 500kva/600-347v/3ph/60hz dry type transformer, s/n DB95G
    • (2) HAMMOND 500kva/600-208/120v/3ph/60hz dry type transformers, s/n n/a
    • POLYGON 450kva/575-460/266v/3ph/60hz dry type transformer, s/n 15513
    • RELIANCE FEDERAL PACIFIC 330kva/575-460/266v/3ph/60hz dry type transformer, s/n FH330DFMD

    CRANES & MATERIAL HANDLING

    • KAVERIT 40ton capacity double girder top running overhead bridge crane with (3) 25ton capacity hoists, approx. 60' span, 24' height under hook, s/n 747-27-001
    • KONE 40ton capacity double girder top running overhead bridge crane with twin 20ton capacity hoists, approx. 26' span, 18' height under the hook, s/n n/a
    • KONE 40ton capacity double girder top running overhead bridge crane with twin 20ton capacity hoists, approx. 26' span, 18' height under the hook, roll spreader beam, s/n n/a
    • KONE 40ton capacity double girder top running overhead bridge crane with (3) 25ton capacity hoists, approx. 60' span, 24' height under hook, s/n 4176
    • DEMAG 40ton capacity double girder top running overhead bridge crane with approx. 29' span, 24' height under the hook, pendant control, s/n 95379
    • DEMAG 30ton capacity double girder top running overhead bridge crane with approx. 29' span, 24' height under the hook, pendant control, s/n 440502
    • (2) KONE 30ton top-running double girder overhead bridge cranes with approx. 42' span, 50' under the hook, 100' runway with buss bar, s/n: 550-27-002; 550-27-001
    • SHAWBOX 25ton capacity top-running double-girder, double hoist overhead bridge crane system with 85' span, 65' height under hook and 270' runway with bussbar, s/n: 420-27-001
    • PROVINCIAL 22ton capacity double girder top running overhead bridge crane with approx. 90' span, 17' height under hook, s/n 741-27-008
    • DEMAG 20ton capacity double girder underslung overhead bridge crane with approx. 20' span, 18' height under hook, s/n n/a
    • KONE 20ton capacity double girder underslung overhead bridge crane with approx. 18' span, 14' height under the hook, pendant control, s/n 380-27-004
    • DEMAG 5TON capacity top-running single-girder overhead bridge crane system with 24' span, 20' height under the hook, and 100' runway with bussbar, s/n: 952-27-015
    • MORGAN PROVINCIAL 5ton capacity single girder underslung bridge crane with DEMAG 5ton hoist, pendant control, s/n 321-27-007
    • DOMINION 2ton capacity single girder underslung bridge crane with BUDGIT 2ton capacity electric chain hoist with trolley, s/n 321-27-006
    • (2) DEMAG 3TON capacity column mounted jib arms with 13' span and 12' height under the hook, s/n: 85683; 85682
    • (5) KITO 3ton capacity electric chain hoists with trolley, s/n n/a
    • CM POWERSTAR 5ton capacity electric chain hoist with 5 ton x 30' span I-beam, s/n: n/a
    • SHAWBOX 5ton capacity electric hoist with trolley, s/n: n/a
    • VULCAN 1TON capacity electric chain hoist with powered trolley and beam, s/n n/a
    • KITO 1.5ton capacity chain hoist with trolley, s/n: n/a
    • KITO 1ton capacity chain-fall with trolley, s/n: n/a
    • KITO 1 TON capacity electric chain hoist with column mounted jib arm, s/n n/a
    • ABELL-HOWE 1/2ton capacity column mounted jib arm with KITO 1/2ton capacity electric chain hoist, s/n n/a
    • ABELL-HOWE 1ton capacity freestanding jib arm, s/n: n/a
    • (2) KITO 1ton capacity electric chain hoists, s/n n/a
    • (2) VULCAN H-50A chain-falls with trolleys, s/n: n/a
    • KITO 2ton capacity electric chain hoist with trolley, s/n n/a
    • (3) MOTIVATION 2,000lbs capacity column mounted jib arms with KITO 1ton electric chain hoist, s/n n/a
    • (2) VULCAN 3ton capacity electric chain hoist with trolley and I-beam, s/n 321-27-007; N/A
    • KITO 3ton capacity electric chain hoist with trolley, s/n n/a
    • KITO 2ton capacity electric chain hoist with trolley, s/n N/A
    • CHATILLON 5000X20LBS crane scale, s/n: n/a
    • SAF-T-LIFT S-29-08 personnel lifting cage with 1250lb capacity, s/n: N/A
    • KONE 38 TON capacity spreader beam with roll hooks, s/n n/a
    • (2) 80,000 LBS capacity spreader beam with roll hooks, s/n n/a
    • 34 TON capacity engineered spreader beam, s/n: n/a
    • 30 TON capacity easy turn swivel spreader beam with cart, s/n 745-27-023
    • PRITCHARD 35,000lbs capacity spreader beam with roll hooks, 20' span, s/n n/a
    • 20 TON capacity engineered spreader beam, s/n 380-27-050
    • (2) MOTIVATION adjustable forklift boom attachments, s/n: n/a
    • (5+) CASCADES hydraulic forklift clamp attachments, s/n n/a
    • (11) LAMB automated monorail log handling grapples with variable travel speed, onboard grapple hydraulics, collision avoidance system, standalone pendant control for manual operation, s/n n/a
    • (2) HOOD 418 hydraulic stationary grapple loaders with 16' arm, operator station, hood 250df log handling grapple, HOOD hydraulic power pack, s/n 48073; 380-50-060
    • HOOD 7000 hydraulic stationary grapple loader with 20' arm, operator station, HOOD 250DF log handling grapple, hydraulic power pack, s/n n/a

    FACTORY EQUIPMENT

    • CATERPILLAR SR 4 3412 DIESEL stand-by generator set with 625kva/500kw/600v/3ph/60hz, CATERPILLAR 3412 750HP diesel engine, digital microprocessor control, s/n 5NA06175
    • AC DELCO diesel generator set with twin DETROIT DIESEL engines, 200kw/250kva/550-600v/3ph/60hz, switching breaker, control cabinet, aluminum fuel tank, transfer switch, s/n 189-H-56
    • (2) ATLAS COPCO GA55 75 hp rotary screw type air compressors, s/n n/a
    • PNEUMATIC PRODUCTS desiccant type air dryer, s/n n/a
    • (2) ATLAS COPCO ZT275-8,5 125hp rotary screw type air compressors, s/n: 6091430-031; 6091430-032
    • SULLAIR 32-300L 30 hp rotary screw type air compressor, s/n 003-57676
    • INGERSOLL RAND 15hp tank mounted piston type air compressor, s/n n/a
    • INGERSOLL RAND T-30 5hp tank mounted piston type air compressor, s/n n/a
    • NATIONAL 10hp tank-mounted piston-type air compressor, s/n: SW-30
    • NATIONAL 10hp portable tank mounted piston type air compressor, s/n n/a
    • NATIONAL 5hp tank mounted piston type air compressor, s/n: n/a
    • CHAMPION 5hp tank mounted piston type air compressor, s/n: n/a
    • SULLAIR air receiver tank, s/n: n/a
    • ITT/GOULDS DUAL DRIVE redundant vertical shaft centrifugal pump with 150 hp electric main drive motor, secondary backup diesel driven drive shaft, (engine sold separately) s/n n/a
    • JOHN DEERE 6081AF001 POWERTECH 1685F 8.1 liter diesel pump backup engine with 270hp, bell housing and driveshaft, s/n RG6081A004953
    • WESTEEL (2009) 22HW 1200 liter capacity outdoor contained fuel tank, s/n 67 09 02238
    • WESTEEL fuel cube portable fuel tank, s/n n/a
    • (2) ITT/GOULDS vertical shaft centrifugal pumps with 150 hp electric main drive motor, s/n n/a
    • CUMMINS V-378-F1 skid-mounted diesel powered centrifugal pump with 112hp drive motor, s/n: 2023988
    • (2) KUBOTA 3-cylinder diesel pumps (not in service)
    • ARO pneumatic diaphragm pump with hoses, s/n: n/a
    • PARKER HYDRAULICS GUARDIAN portable hydraulic oil filter, s/n: 30CZ
    • BALDOR portable electric hydraulic oil filter, s/n: n/a
    • CARRIER CENTURION rooftop air conditioner, s/n: 3708G50034
    • (2) STIHL TS760AV gas powered wet concrete saws, s/n: n/a
    • MECART 28'X12' soundproof insulated modular office building with (3) office partition, skid mounted construction, s/n n/a
    • (3) SWEED 510AL scrap wire choppers with 1.5hp/575v/3ph/60hz, s/n 43007; N/A; N/A
    • DUNHAM BUSH (2009) HXW01620-6SR refrigerated liquid chiller with digital microprocessor control, R134A refrigerant, skid mounted construction, used as plant water chiller, s/n 2A92100132
    • INGERSOLL RAND pneumatic tugger, s/n n/a
    • GEISMAR STUMEC (2001) PR.8 5.5 HP gas powered rail drill, s/n 28403
    • SANEX SPRAYMATE backpack type gas powered sprayer, s/n n/a
    • INCINCO batch type electric heat treat oven with digital temperature controller, 60kw heater element, approx. 31"x61"x60" chamber dimensions, s/n 0796

    LAB & Q.C. EQUIPMENT

    • AMERICAN SIGMA VERSAFLOW digital water tester, s/n: n/a
    • DESPATCH digital lab oven, s/n: n/a
    • LABLINE IMPERIAL V lab oven, s/n: n/a
    • KAJAANI P4500452 V1.1 KAPPA measuring unit, s/n 4295146
    • LORENTZEN & WETTRE digital tensile strength tester with built in results printer, spare parts and analog testers, s/n 755
    • TESTING MACHINES INC. MODEL 32-06 monitor/slip & friction digital tester, s/n n/a
    • MESSMER BUCHEL PARKER PRINT -SURF bench type digital surfactometer with built in thermal results printer, s/n 471S/037
    • FISHER SCIENTIFIC digital lab oven, s/n n/a
    • (3) THERMOLINE electric heat treat ovens, s/n n/a
    • LAWSON MCC52 hydraulic paper guillotine with MICROCUT PLC control, 52"x52" capacity, s/n 802529

    ROLLING STOCK

    • BARKO 475B HRT rough terrain hydrostatic wheeled grapple loader with 40' boom, CUMMINS diesel engine, s/n 22757
    • GROVE IND 24 mobile low profile carry deck crane with 12,000 lbs capacity, 20' boom, s/n 66609
    • CATERPILLAR (NOV-2004) 980G SERIES II wheel loader with DENHARCO PARRALIFT hydraulic grapple log handling attachment, s/n CAT0980GTAWH02304
    • (5) W.B.M spare hydraulic log grapples, s/n n/a
    • CLARK 6CS25C 4,150lbs capacity lpg forklift with 188" max vertical reach, 3-stage high visibility mast, side shift, cushion tires, s/n 6139MC0016824
    • CATERPILLAR T40DSA 4,000lbs capacity lpg forklift with 173" max vertical reach, 3-stage mast, cushion tires, s/n 2LC1167
    • PETTIBONE swing arm FRONT END LOADER, S/N N/A (NOT IN SERVICE)
    • CLARK GC500 4,000lbs capacity lpg forklift with 128" max vertical reach, low height mast, cushion tires, s/n 3554691208
    • (2) CATERPILLAR NPV 60 ride-on electric pallet trucks with 6,000 lbs capacity, 24v battery, s/n 2HL02336; 2HL10658
    • (6) CAT-TOYOTA-LINDE lpg forklifts (PARTS MACHINES-NOT IN SERVICE)
    • FORKLEVATOR FLJ-15B four post hydraulic forklift hoist with 15,000 lbs capacity, 15 hp hydraulic power pack and control, s/n FL10,994BN
    • FREIGHTLINER (1990) FLC112 64SD tandem axle tilt & load truck with CATERPILLAR 3406 engine, EATON FULLER manual transmission, 39,000KG GVWR VIN 1FVX1RYB3LH443162
    • MFG UNKNOWN 4Oyd roll-off bin with cover, s/n n/a
    • (5) DODGE RAM 1500 reg cab pickup trucks, VIN n/a (OFF-ROAD/YARD TRUCKS ONLY - NOT PLATED)
    • (2) CHEVROLET K1500 regular cab pickup trucks, VIN n/a (OFF-ROAD/YARD TRUCKS ONLY - NOT PLATED)
    • (2) FORD F250 pickup trucks, VIN N/A (OFF-ROAD/YARD TRUCKS ONLY - NOT PLATED)
    • 53' TANDEM axle flat deck trailer with safety anchoring frame system, s/n n/a (OFF-ROAD/YARD TRAILER ONLY - NOT PLATED)
    • MFG UNKOWN log trailer, s/n n/a (OFF-ROAD/YARD TRAILER ONLY - NOT PLATED)
    • TANDEM axle log trailer (OFF-ROAD/YARD TRAILER ONLY - NOT PLATED)
    • MFG UNKNOWN water tanker trailer, s/n n/a (OFF-ROAD/YARD TRAILER ONLY - NOT PLATED)
    • SULLIVAN D160QV tow behind air compressor, s/n: 10792
    • (2) GILSON tow behind mortar/grout mixer, s/n n/a
    • ATCO 10X50 mobile jobsite office modular building, s/n n/a

    ROLL PACKAGING LINE

    • LAMB complete semi-automatic packaging line consisting of LAMB hydraulic roll kicker, hydraulic turntable, conveyors, LAMB wrapper, LAMB banding machine, ACCU-SORT (2005) XLT-200 omni directional barcode scanner s/n n/a (CONTROL CABINETS NOT AVAILABLE)

    BIOMASS CO-GENERATING PLANT

    • WESTINGHOUSE SC23 steam turbine with WOODWARD 501D digital monitor & governor, 46,700 kw rated capacity @ 3600 rpm, steam flow 697,900 lbs/hr, 841 psig inlet steam pressure @ 790 deg f rated capacity, XEBEC 40HDI4FGHQT desiccant type air dryer, gas turbine, oil and filtration system, s/n n/a
    • HAWKER SIDDELEY BRUSH BDAX 7-290ERH synchronous turbo-generator with 54,900kva/13,800v/2298a/3ph/60hz @ 3600 rpm, s/n 61210A-1G
    • BIOMASS BOILER (More Info Coming Soon)
    • BIOMASS BOILER PRECIPITATOR, S/N: N/A (More Info Coming Soon)

    CONVENTIONAL MACHINE TOOLS

    • TOS SN63B gap bed engine lathe with 25" swing over bed, 28" swing in the gap, 120" distance between centers, 3" spindle bore, 19.5" 4-jaw chuck, speeds to 1000 rpm, in/mm threading, s/n 063374223
    • LODGE&SHIPLEY engine lathe with 42" swing over bed, 240" distance between centers, 3" spindle bore, 20" 4-jaw chuck, speeds to 500 rpm, in/mm threading, spare face plates, steady rest, follow rest, coolant, s/n 45306
    • MAS VO63 heavy duty way type radial arm drill with speeds to 2000 rpm, preselect, (2) steel t-slot box tables, s/n 145231040
    • MEBA 400 hydraulic horizontal band saw with 15" mac cutting capacity, coolant, in feed and out feed roller conveyors, hydraulic vise, s/n 33469
    • STERLING 2" pedestal drill grinder, s/n DG0263
    • ALLSTEEL 1/4-8 MAXI hydraulic shear with 1/4" x 8' capacity, front operated power back gauge, squaring arms, s/n M1482
    • BALDOR 1409W 12" double-end pedestal grinder with 7.5hp motor, s/n: X1203197019
    • MEBA 10" horizontal metal cutting bandsaw with roller conveyors, s/n: 321
    • KING INDUSTRIAL KC-50 28" variable speed gear head drilling machine with drills and tooling, s/n: 1220
    • SOLBERGA SZ2025 heavy-duty floor type gearhead drill, s/n: 6347
    • SOLBERGA SE2035 heavy duty floor type gearhead drill, s/n n/a
    • ARBOGA 1025 floor type gearhead drill, s/n: n/a
    • GENERAL floor type drill press, s/n n/a
    • LANDIS heavy duty power bolt and pipe threader with threading head, s/n n/a
    • RIDGID 535 power threader with die holder, s/n EAM15302K97
    • (2) RIDGID 535 power threaders, s/n: n/a
    • CIL 15" vertical bandsaw, s/n: n/a
    • GENERAL 350 14" table saw with router attachment, s/n: AB1426
    • (3) REKO portable induction bearing heaters, s/n: n/a
    • RIDGID HC-450 orbital pipe drill, s/n: VAL-01337B95
    • BLACK AND DECKER 3255 8gauge nibbler with 1000spm, s/n: 9541-KK
    • FORD SMITH 8" double end pedestal grinder, s/n n/a
    • FORD SMITH 6" double end pedestal grinder, s/n n/a
    • MOD-U-BLAST floor type sand blasting cabinet with media recovery, s/n n/a
    • HANCHETT SK 24 circular slitter knife grinder with 3"-24" dia slitter knife capacity, 0-90 deg beveling capacity, 6" grinding wheel, 1.5 hp spindle drive, incremental down feed, coolant, s/n WC

    WELDING & FABRICATION

    • MILLER SPECTRUM 500 DC plasma cutter with cables and gun, s/n: JK724767
    • MILLER SYNCROWAVE 300 AC/DC TIG welder with cables and gun, s/n: n/a
    • MILLER SYNCROWAVE 500 AC/DC TIG welder, s/n: JK731676
    • MILLER DIMENSION 400 CC/CV-DC ARC welding power source, s/n n/a
    • MILLER GOLDSTAR 400SS ARC welder, s/n: n/a
    • MILLER SPECTRUM DC750 plasma cutter with cables and gun, s/n KC252926
    • MILLER SPECTRUM DC500 plasma cutter with cables and gun, s/n n/a
    • ACKLANDS 400 CC/CV-DC ARC welder with cables and gun, s/n: n/a
    • ACKLANDS N400-DC ARC welder with some cables and gun, s/n n/a
    • ACKLANDS PRO-LINE 500 HF TIG welder with cables and gun, s/n JJ414625
    • ACKLANDS AK-WAVE 351 TIG welder with cables and gun, s/n KH396568
    • LINCOLN IDEALARC ARC welder with DRIGARD electrode oven, s/n: n/a
    • LINCOLN IDEALARC 600 welding power source, s/n n/a
    • LINCOLN ELECTRIC portable arc welder with cables and gun, s/n: n/a
    • LINCOLN IDEALARC  250 ARC welder with cables and gun, s/n: n/a
    • PROLINE CV-300 ARC welder with cables and gun, s/n JK334651
    • HOBART INVERTER welder with cables and gun, s/n n/a
    • HOBART MEGA ARC 400 portable arc welder with cables and gun, s/n: n/a
    • ABW portable spot welder with cables and gun, s/n ABW-1
    • NEDERMAN snorkel type welding fume extractor with blower, s/n: n/a
    • NEDERMAN snorkel type welding fume extractor, central exhaust blower, s/n n/a
    • AIRLUX 5000 portable welding fume extractor, s/n n/a
    • DONALDSON TORIT 70CAB 1hp/575v/3ph/60hz dust collector, s/n IG408882
    • 30"X50" downdraft table with blower, s/n: n/a
    • (2) HNM orbital pipe cutting systems, s/n n/a

    ALSO:

    4'x8'x1" steel shop table with RIDGID 8" vise; 4'x8'x1.5" steel work bench with 8" vise; 4'x8'x3/4" steel work bench with 8" vise; (1) 4'x8'x1", (1) 4'x8'x3/4", (1) 4'x8'x1/2" steel work benches with vises; (3) 4'X8'X1" steel work benches with vises; lifting and rigging supplies including chain falls, hoists, come-a-long and trolleys; portable air compressors; steel cabinets with plumbing fixtures and pipe flanges; (10+)KNAACK rolling job box with tools and contents; dollies, work lights and shop vacuums; emergency eyewash stations throughout plant; (50+) high-boy cabinets with supplies; (25+) retractable hose and cable reels; SCBA breather units and gas masks throughout plant; index cabinets with fastening hardware; pigeonhole cabinets with contents consisting of pipe flanges, parts, plumbing fixtures, fastening hardware and components; HYTORC-SL hydraulic torque multipliers; EASY-LASER BTA laser leveling kit; rotary index carousel with fastening hardware; (30+) ROUSSEAU butcher block workbenches with contents; (15+) FLYGT side discharge submersible electric pump; (150+) sections of medium duty adjustable pallet racks; (80) 7'x10' concrete block dividers; shelves with contents consisting of sheaves, pulley, motors, spare screen baskets, manual valves, stainless and conventional plumbing fixtures-elbows-t's-y's-etc; selection of brand new KADANT FLEX doctor and roll cleaning blades; STORES INVENTORY including: fastening hardware with index parts bins and steel shelves; steel shelves with parts and components; stainless steel and conventional plumbing fixtures and hardware with shelving; stainless steel and conventional fastening hardware with shelving; (75) sections of steel shelving with gaskets, rubber flex couplers, bearings, valve repair kits, hardware, plumbing fixtures, spare motors, spare pneumatic and hydraulic cylinders, flanges, belts, misc parts and components; ferrous and nonferrous raw materials in bar, tube and off cuts format; approx. 64'lx42'wx18'h modular steel building with siding, pad mounted, all bolted construction; (4) 20’ sea containers with contents; (100+) brand name gear reducers new and rebuilt; (150+) electric motors ranging from 50 to 1,500 hp; (10+) spools of wire rope; (25+) spools of TECK electrical cable; (15+) dumping hoppers and MUCH MORE!

    AUCTION CONDUCTED BY CORPORATE ASSETS INC. PROUDLY IN CONJUNCTION WITH:

    CAN-AM Machinery, Inc.
    www.canammachinery.com

    LIVE WEBCAST ONLY


    Terms & Conditions

    Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.
    DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS
    MODALITÉS ET CONDITIONS DE VENTE

    Payment

    A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.
    THIS SALE WILL BE CONDUCTED IN USD.
     
    Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer1.
     
    To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale2. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

     

    1. Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
    2. To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.
     

    Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

    Payment in full must be made before or immediately after the conclusion of the auction.
     
    For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.
     
    For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

     

     

    • Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
    • Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
    • Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

     

     

     
    The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.
    Download Full Payment Information
    Download Buyer Deposit Form
    CAD Wire Transfer Details
    USD Wire Transfer Details
    Interac E-Transfer Payment Instructions

    Removal Details

    Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.
     
    Please read our Full Terms & Conditions for Removal Requirements

     

     
    Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

     

    Rigger Release Authorization Form

     

    Sample of 'Certificate of Insurance' or 'CI'

     

     

    *For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

    Shipping Services

    For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

    * For shipping large items, trucking and transport services are available through Fuze Logistics Inc.
    Fuze Logistics Services Inc.
    Mr. Chris Tan
    941.702.3310
    [email protected]
    www.fuzelogistics.com

    US Inbound Customs Brokers

    *Cross border logistics, including fees and customs clearance, are available through third-party brokers.
    Montgomery International Brokers
    Bill Clune or Melanie Koerber
    716.875.5100 EXT 105
    [email protected]
    www.montyinternational.com    		 Omega Customs Brokers Inc
    Ralph Ronderos
    305.592.5656 EXT 1005
    [email protected] or [email protected]
    www.omegacb.com