Surplus Assets of

Westron Rotating Solutions Canada Inc. #4

New & Used Air Compressors, Spare Parts and More!

Date

Thursday, May 6, 2021

Start Time

10:30 AM EDT

Inspection

BY APPOINTMENT ONLY. Please email [email protected] to arrange a date and time.

Removal

All assets must be removed no later than Thursday, May 20 by 5:00 P.M. EST BY APPOINTMENT ONLY.

Location

Assets Located in Brantford, Ontario

Industry

Other

FEATURING: GARDNER DENVER APEX5-15A 15 HP rotary screw air compressor; GARDNER DENVER (REBUILT 2019) BESDB 15 HP tank-mounted rotary screw air compressor; (2) ATLAS COPCO GA160 200 HP rotary screw air compressors; GARDNER DENVER FAUOPD 200 HP rotary screw air compressor; (2) GARDNER DENVER ELECTRA SAVER II 100 HP rotary screw air compressors; (3) GARDNER DENVER ELECTRA SAVER II 50 HP liquid-cooled rotary screw air compressors; DOMNICK-HUNTER POLESTAR DRD325 refrigerated air dryer; THOMPSON GORDON TG500 refrigerated air dryer; (2) ULTRA AIR UA1000A0 refrigerated air dryers; BRIDGEPORT SERIES I vertical milling machine with 42"x9" table, speeds to 4200 RPM, SHARS power feed; CY MAGNUM-CUT FEL-26120GCY 26”x120” gap bed engine lathe with 4.25" spindle bore, speeds to 1120 RPM; HOTSY APW 7660 automatic parts washer with rotary table; RIDGID 300 pipe threader with tri-stand, threading heads, attachments, pipe cutter and dies; CLARK C500-Y135 LPG 13,500 lb. outdoor forklift with 206" max. lift height; HYSTER H80XM LPG 7,390 lb. forklift; CANABLAST blast system with CANABLAST M-3648-P shot blast cabinet, CANABLAST PRM-16 dust collector with CANABLAST DC-160 reclamation unit; (2) ECONOLINE shot blast cabinets; DODGE (2014) RAM service van with 3.6L V6 engine; MILROYAL MC1-M40-D141 metering pump with 54.5 GPH capacity; (2) MILROYAL MB1-M42-D140 metering pumps with 27.6 GPH capacity; GARDNER DENVER INDUSTRIAL 45 SERIES blower with 4000 max. RPM; (3) DEAN PH2111 1X1.5/2X8 centrifugal pumps; GOULDS 360 PSI centrifugal pump with 15 HP motor; SUTORBILT GARDNER DENVER GACLBRA blower with 3600 RPM; HUSKY 4.6 gal. portable shop compressor; (4) 5000 lb. pallet jacks AND MORE!

ROTARY SCREW AIR COMPRESSORS

GARDNER DENVER APEX5-15A rotary screw air compressor with 15 HP, 123 PSI, s/n: D119780
GARDNER DENVER (REBUILT 2019) BESDB tank-mounted rotary screw air compressor with 15 HP, 125 PSI, s/n: W16470
(2) ATLAS COPCO GA160 rotary screw air compressors with 200 HP, 157 PSI, s/n: AIF.018745, AIF.040797
GARDNER DENVER FAUOPD rotary screw air compressor with 200 HP, 125 PSI, s/n: M62150
SULLAIR 20-150H-ACAC rotary screw air compressor with 150 HP, s/n: 003-78677
GARDNER DENVER EAQ99K ELECTRA SCREW rotary screw air compressor with 125 HP, s/n: S030186
GARDNER DENVER EAP0MB ELECTRA SAVER II rotary screw air compressor with 100 HP, 25 PSI, 2488 hrs (recorded on meter at time of listing), s/n: M42739
GARDNER DENVER ECPQMC rotary screw air compressor with 100 HP, 100 PSI, s/n: M34149
GARDNER DENVER ECMQLC ELECTRA SAVER II rotary screw air compressor with 75 HP, 110 PSI, s/n: M39571
GARDNER DENVER EBHSJB ELECTRA SAVER II liquid-cooled rotary screw air compressor with 50 HP, 100 PSI, s/n: M70601
GARDNER DENVER ECHSHE ELECTRA SAVER II liquid cooled rotary screw air compressor with 50 HP, 100 PSI, s/n: M24193
GARDNER DENVER EBHSJD ELECTRA SAVER II liquid-cooled rotary screw air compressor with 50 HP, 100 PSI, 4327 hrs (recorded on meter at time of listing), s/n: M09795

COMPRESSOR SUPPORT EQUIPMENT

DOMNICK-HUNTER POLESTAR DRD325 refrigerated air dryer, s/n: 3762640001
THOMPSON GORDON TG500 refrigerated air dryer, s/n: 86G343
(2) ULTRA AIR UA1000A0 refrigerated air dryers with 100 PSI, s/n: U-029801, n/a
MFG. UNKNOWN desiccant air dryer, s/n: n/a
(2) GARDNER DENVER CTS60 ELIMINATOR II oil/water separators
SEPURA SEP900ST water separator

FACTORY SUPPORT EQUIPMENT

CANABLAST blast system with CANABLAST M-3648-P shot blast cabinet, CANABLAST PRM-16 dust collector with CANABLAST DC-160 reclamation unit, s/n: n/a
ECONOLINE shot blast cabinet with 120 max. PSI, s/n: n/a
ECONOLINE shot blast cabinet with 120 max. PSI, cyclone & dust collector, s/n: n/a

CONVENTIONAL MACHINE TOOLS

BRIDGEPORT SERIES I vertical milling machine with 42"x9" table, speeds to 4200 RPM, SHARS power feed, MITUTOYO DRO, s/n: J258296
CY MAGNUM-CUT FEL-26120GCY gap bed engine lathe with 26" swing over bed, 120" between centers, 4.25" spindle bore, speeds to 1120 RPM, inch/metric threading, 12" 3 jaw chuck, steady rests, coolant, s/n: 800201659
MANLEY 40 ton H-frame shop press, s/n: 83546411B
ENERPAC 4.5 ton (10,000 PSI) hydraulic H-frame shop press, s/n: n/a
HOTSY APW 7660 automatic parts washer with rotary table, s/n: C0506-62704
METALAS SENIOR 125T parts washer with rotary table, s/n: C1044
RIDGID 300 pipe threader with tri-stand, threading heads, attachments, pipe cutter and dies

FORKLIFTS

CLARK C500-Y135 LPG outdoor forklift with 13,500 lb. capacity, 206" max. lift height, 3 stage mast, pneumatic tires, fully enclosed cab, fan, heater, 84" forks, 6,376 hrs (as recorded on meter at time of listing), s/n: Y1015-63-4005
HYSTER H80XM LPG forklift with 7,390 lb. capacity, 121" max. lift height, 2 stage mast, side shift, pneumatic tires, 8,248 hrs (recorded on meter at time of listing), s/n: K005D06093Y

BLOWERS, MOTORS, PUMPS & MROs

MILROYAL MC1-M40-D141 metering pump with 54.5 GPH capacity, 1440 PSI, s/n: C14663-1
(2) MILROYAL MB1-M42-D140 metering pumps with 27.6 GPH capacity, 1500 PSI, s/n: C14663-3, C14663-4
PLENTY MIRRLEES HEA90-3NL pump with 1150 RPM, 120 PSI, 1819 USGPM, s/n: 35064
GARDNER DENVER INDUSTRIAL 45 SERIES blower with 4000 max. RPM, s/n: S472769
ROOTS 95P universal RAI blower with 1-3/8" output shaft, s/n: 95P68512
ROOTS MODEL 412 ram blower with 1.5" output shaft, s/n: 0507912073
(3) DEAN PH2111 1X1.5/2X8 centrifugal pumps with 1750 RPM, 275 PSI, s/n: 178104, 177722, 177721
(2) THERMAL TRANSFER AA65-1 air compressor heat exchangers/aftercoolers
TOSHIBA 100 HP electric motor with 1770 RPM, 575V, 3 PH, 60 HZ
GOULDS 360 PSI centrifugal pump with 15 HP electric motor with 3550 RPM, 575V, 3 PH, 60 HZ
SUTORBIT GARDNER DENVER GACLBRA blower with 3600 RPM, s/n: S491383
SUTORBILT GARDNER DENVER GAFLDRA0225 air end with 2350 RPM, s/n: S415064

VEHICLES

DODGE (2014) RAM service van with 3.6L V6 gas engine, automatic transmission, power steering, power locks, power windows, cruise control, CD & AM/FM radio, A/C, 208,626 km (recorded on odometer at time of listing), VIN: 2C4JRGAG0ER339532
CHEVROLET (2010) SILVERADO 1500 pickup truck with 4.3L V6 gas engine, automatic transmission, manual windows, manual locks, AM/FM radio, A/C, extended cab, RWD, toolbox, VIN: 1GCSCPEX9AZ296969
CHEVROLET (2003) SILVERADO 1500 pickup truck with 4.3L V6 gas engine, automatic transmission, manual windows, manual locks, AM/FM radio, A/C, RWD, VIN: 1GCEC14V63Z235124

ALSO:

GARDNER DENVER compressor air ends; GARDNER DENVER, WALKER & DOMNICK HUNTER in-line filters; 48"X60"X84"H paint booth; fork extensions; (4) 5000 lb. pallet jacks; come-a-longs & chain falls; lifting equipment including SLINGS, CHAINS, EYEBOLTS & SHACKLES; (10+) drums of BLOCKBUSTER industrial degreaser; HUSKY 4.6 gal. portable shop compressor; MOTOMASTER portable shop compressor; appliances, file cabinets, office furniture AND MORE!

LIVE WEBCAST ONLY

Terms & Conditions

Corporate Assets Inc. assumes no liability for errors or omissions on this Web site. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale.

DOWNLOAD CORPORATE ASSETS INC. FULL TERMS & CONDITIONS

MODALITÉS ET CONDITIONS DE VENTE

Payment

A Buyer's Premium of 18% for all Webcast (Remote) bidders will apply at this sale.

Pre-Approval by Corporate Assets Inc. will be required to participate in the sale. Potential Bidders must register and be approved (in person for Onsite auctions or online for Live Webcast auctions). Bidders may be asked to complete the "Buyer Deposit Form" and provide a deposit equal to 25% of their requested Purchasing Limit (the maximum amount they plan to spend) plus the Buyer's Premium (see above for applicable Buyer's Premium) and must be made by Interac e-transfers or Direct Bank Wire Transfer¹.

To ensure approval as a Bidder, please contact us to make arrangements as far in advance of the sale as possible. The deposit must be received no later than 1 business day prior to the commencement of the sale². For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Please keep in mind that bank charges may apply to incoming and/or outgoing wire transfers by your/our bank/financial institution.
To meet the Terms and Conditions of Sale, please keep in mind that wire transfers traditionally take between 2 - 4 business days to be processed by your bank. For Bank Wire Transfer details, please contact our office at 416.962.9600 and request to speak with an Accounting Administrator.

Invoices for the balance of the purchase price will be emailed and/or faxed to successful bidders within 24 hours of the close of the auction and are due upon receipt.

Payment in full must be made before or immediately after the conclusion of the auction.

For International (Non-Canadian and Non-U.S. Residents) Buyers all payments and deposits shall ONLY be made by wire transfer.

For Canadian and U.S. Buyers, all payments can be made by wire transfer, certified cheque, bank draft, Interac Debit, Visa, Mastercard, Interac e-transfers, or company cheque accompanied with a valid bank letter of authorization guaranteeing irrevocable payment to Corporate Assets Inc. in the following format: "Name of Bank hereby guarantees irrevocable payment of cheques payable to Corporate Assets Inc. up to Amount in Words & Currency for purchases made by our client Name of Client. This letter is valid for purchases made at the auction of Name of Auction being held in City, State/Province on Date."

Payment by way of Visa, Mastercard will ONLY be accepted for purchases, and not for deposits, from buyers whose total invoice does not exceed $2,500.
Payment by way of Interac e-Transfers will ONLY be accepted for purchases from buyers whose total invoice does not exceed $25,000.
Payments may be made in advance of the auction by way of wire transfer and any balance in excess of the balance owing will be refunded after the auction.

The Auctioneer reserves the right to put articles back up for auction if a deposit is not received at or before the time of sale.

Download Full Payment Information

Download Buyer Deposit Form

CAD Wire Transfer Details

USD Wire Transfer Details

Interac E-Transfer Payment Instructions

Removal Details

Applicable for all Purchasers, their employees, riggers, machinery movers, contractors, and agents who participate in the disconnection and/or removal of items purchased at auction.

Please read our Full Terms & Conditions for Removal Requirements

Purchasers are responsible for removing all articles purchased unless an Exclusive Rigger* has been designated for the sale. “CI” on the purchaser’s invoice designates that a proper certificate of insurance is required before any item marked “CI” can be mechanically removed. Furthermore, properly authorized rigger release instructions, in writing, are required by Corporate Assets Inc.’s office before a Purchaser/Mover/Rigger can commence removal of these items. These forms can be downloaded below.

Rigger Release Authorization Form

Sample of 'Certificate of Insurance' or 'CI'

*For sales with Exclusive Riggers, removal fees will apply. Please refer to the posted Lot Catalogue for pricing. Fees do not include container loading, blocking/bracing, specialty packaging, shipping, or other services. Trucking and transport services may be available through a third-party supplier. More details below. The Buyer's Premium does not apply to posted rigging fees.

Shipping Services

For small items where a pallet isn't required or items are already in packages/boxes, Corporate Assets Inc. can arrange shipping via UPS or FedEx or using a buyer’s business account. The cost will be the responsibility of the buyer. Please contact [email protected] to arrange.

* For shipping large items, trucking and transport services are available through Fuze Logistics Inc.

Fuze Logistics Services Inc.
Mr. Chris Tan
941.702.3310
[email protected]
www.fuzelogistics.com

US Inbound Customs Brokers

*Cross border logistics, including fees and customs clearance, are available through third-party brokers.
Montgomery International Brokers Bill Clune or Melanie Koerber 716.875.5100 EXT 105 [email protected] www.montyinternational.com	Omega Customs Brokers Inc Ralph Ronderos 305.592.5656 EXT 1005 [email protected] or [email protected] www.omegacb.com